Department of Orthopedics, Kunming General Hospital, PLA, Kunming, China.
Spine (Phila Pa 1976). 2009 Dec 15;34(26):E959-66. doi: 10.1097/BRS.0b013e3181c09985.
STUDY DESIGN.: Prospective trial. OBJECTIVE.: To develop and validate a novel, patient-specific navigational template for cervical pedicle placement. SUMMARY OF BACKGROUND DATA.: Owing to the narrow bony anatomy and the proximity to the vertebral artery and the spinal cord, cervical instrumentation procedures demand the need for a precise technique for screw placement. PATIENT.: Specific drill template with preplanned trajectory has been thought as a promising solution for cervical pedicle screw placement. METHODS.: Patients with cervical spinal pathology (n = 25) requiring instrumentation were recruited. Volumetric CT scan was performed on each desired cervical vertebra and a 3-dimensional reconstruction model was generated from the scan data. Using reverse engineering technique, the optimal screw size and orientation were determined and a drill template was designed with a surface that is the inverse of the posterior vertebral surface. The drill template and its corresponding vertebra were manufactured using rapid prototyping technique and tested for violations. The navigational template was sterilized and used intraoperatively to assist with the placement of cervical screws. In total, 88 screws were inserted into levels C2-C7 with 2 to 6 screw in each patient. After surgery, the positions of the pedicle screws were evaluated using CT scan and graded for validation. RESULTS.: This method showed its ability to customize the placement and the size of each screw based on the unique morphology of the cervical vertebra. In all the cases, it was relatively very easy to manually place the drill template on the lamina of the vertebral body during the surgery. The required time between fixation of the template to the lamina and insertion of the pedicle screws was about 80 seconds. Of the 88 screws, 71 screws had no deviation and 14 screws had deviation <2 mm, 1 screw had a deviation between 2 to 4 mm and there were no misplacements. Fluoroscopy was used only once for every patient after the insertion of all the pedicle screws. CONCLUSION.: The authors have developed a novel patient-specific navigational template for cervical pedicle screw placement with good applicability and high accuracy. This method significantly reduces the operation time and radiation exposure for the members of the surgical team. The potential use of such a navigational template to insert cervical pedicle screws is promising. This technique has been clinically validated to provide an accurate trajectory for pedicle screw placement in the cervical spine.
前瞻性试验。
开发和验证一种用于颈椎椎弓根置钉的新型、个体化导航模板。
由于颈椎解剖结构狭窄,毗邻椎动脉和脊髓,颈椎器械操作需要精确的螺钉放置技术。
具有颈椎病变(n=25)需要器械治疗的患者。
招募需要进行器械治疗的具有颈椎病变的患者(n=25)。对每个所需的颈椎进行容积 CT 扫描,并从扫描数据生成三维重建模型。使用逆向工程技术确定最佳螺钉大小和方向,并设计具有与后椎体表面相反的表面的钻头模板。使用快速原型制造技术制造钻头模板及其相应的椎体,并进行违规测试。对导航模板进行消毒,并在手术中协助放置颈椎螺钉。总共在 C2-C7 水平插入 88 颗螺钉,每个患者植入 2-6 颗螺钉。手术后,使用 CT 扫描评估椎弓根螺钉的位置,并进行验证分级。
这种方法显示了其根据颈椎的独特形态定制每个螺钉的放置和尺寸的能力。在所有情况下,在手术中手动将钻头模板放置在椎板上相对非常容易。从模板固定到椎板到椎弓根螺钉插入之间所需的时间约为 80 秒。88 颗螺钉中,71 颗螺钉无偏差,14 颗螺钉偏差<2mm,1 颗螺钉偏差在 2-4mm 之间,无螺钉放置错误。所有椎弓根螺钉插入后,每位患者仅使用透视一次。
作者开发了一种用于颈椎椎弓根螺钉放置的新型个体化导航模板,具有良好的适用性和高精度。这种方法显著减少了手术团队的操作时间和辐射暴露。这种导航模板用于插入颈椎椎弓根螺钉具有很大的潜力。该技术已在临床上得到验证,可为颈椎椎弓根螺钉放置提供准确的轨迹。