University of Technology Dresden, Faculty of Medicine Carl Gustav Carus, Clinical Sensoring and Monitoring, Fetscherstrasse 74, Dresden, 01307, Germany.
J Biomed Opt. 2009 Nov-Dec;14(6):064037. doi: 10.1117/1.3275472.
Three-dimensional Fourier domain optical coherence tomography (3-D FDOCT) is used to demonstrate that perfusion fixation with a mixture of glutaraldehyde and paraformaldehyde does not alter the geometry of subpleural lung parenchyma in isolated and perfused rabbit lungs. This is confirmed by simultaneous imaging of lung parenchyma with intravital microscopy. To eliminate the diffraction index interfaces between alveolar pockets and walls, we fill the fixed lungs with ethanol by perfusing with gradually increasing concentrations. This bottom-up filling process leaves no remaining air bubbles in the alveolar structures, thus drastically improving the resolution and penetration depth of 3-D FDOCT imaging. We observe an approximately 18% increase in alveolar area after ethanol filling, likely due in large part to elimination of the air/tissue interfaces. 3-D OCT datasets acquired from ethanol-filled lungs allow segmentation of the ethanol-filled structures, which were formerly air-filled, and 3-D reconstruction of larger areas of subpleural alveolar structures. Our innovative process of filling the lungs with ethanol postperfusion fixation thus enables more accurate quantification of alveolar geometries, a critical component of modeling lung function.
三维傅里叶域光学相干断层扫描(3-D FDOCT)用于证明,用戊二醛和多聚甲醛的混合物进行灌注固定不会改变离体灌注兔肺的亚肺实质几何形状。这一点通过活体显微镜同时对肺实质成像得到证实。为了消除肺泡囊和壁之间的衍射指数界面,我们通过灌注逐渐增加浓度的乙醇来填充固定的肺。这种自下而上的填充过程不会在肺泡结构中留下残留的气泡,从而大大提高了 3-D FDOCT 成像的分辨率和穿透深度。我们观察到乙醇填充后肺泡面积增加了约 18%,这可能在很大程度上是由于消除了空气/组织界面。从乙醇填充的肺中获取的 3-D OCT 数据集允许对以前充满空气的乙醇填充结构进行分割,并对更大面积的亚肺肺泡结构进行 3-D 重建。我们在灌注后用乙醇填充肺的创新过程,因此能够更准确地定量肺泡几何形状,这是模拟肺功能的关键组成部分。