Suppr超能文献

溶液的崩溃温度对于在环境温度下冷冻活细胞至关重要。

Collapse temperature of solutions important for lyopreservation of living cells at ambient temperature.

机构信息

Department of Mechanical Engineering, University of South Carolina, 300 Main St., Columbia, South Carolina 29208, USA.

出版信息

Biotechnol Bioeng. 2010 Jun 1;106(2):247-59. doi: 10.1002/bit.22690.

Abstract

In this study, the collapse temperature was determined using the freeze-drying microscopy (FDM) method for a variety of cell culture medium-based solutions (with 0.05-0.8 M trehalose) that are important for long-term stabilization of living cells in the dry state at ambient temperature (lyopreservation) by freeze-drying. Being consistent with what has been reported in the literature, the collapse temperature of binary water-trehalose solutions was found to be similar to the glass transition temperature (T'(g) approximately -30 degrees C) of the maximally freeze-concentrated trehalose solution (approximately 80 wt% trehalose) during the freezing step of freeze-drying, regardless of the initial concentration of trehalose. However, the effect of the initial trehalose concentration on the collapse temperature of the cell culture medium-based trehalose solutions was identified to be much more significant, particularly when the trehalose concentration is less than 0.2 M (the collapse temperature can be as low as -65 degrees C). We also determined that cell density from 1 to 10 million cells/mL and ice seeding at high subzero temperatures (-4 and -7 degrees C) have negligible impact on the solution collapse temperature. However, ice seeding does significantly affect the ice crystal morphology formed during the freezing step and therefore the drying rate. Finally, bulking agents (mannitol) could significantly affect the collapse temperature only when trehalose concentration is low (<0.2 M). However, improving the collapse temperature by using a high concentration of trehalose might be preferred to the addition of bulking agents in the solutions for freeze-drying of living cells. We further confirmed the applicability of the collapse temperature measured with small-scale (2 microL) samples using the FDM system to freeze-drying of large-scale (1 mL) samples using scanning electron microscopy (SEM) data. Taken together, the results reported in this study should provide useful guidance to the development of optimal freeze-drying protocols for lyopreservation of living cells at ambient temperature for easy maintenance and convenient wide distribution to end users, which is important to the eventual success of modern cell-based medicine.

摘要

在这项研究中,使用冷冻干燥显微镜(FDM)方法确定了各种基于细胞培养基的溶液(含有 0.05-0.8 M 海藻糖)的崩溃温度,这些溶液对于在环境温度下(冷冻干燥)通过冷冻干燥将活细胞长期稳定在干燥状态下至关重要。与文献中报道的一致,发现二元水-海藻糖溶液的崩溃温度与最大冷冻浓缩海藻糖溶液的玻璃化转变温度(T'(g)约为-30°C)相似在冷冻干燥的冷冻步骤中,无论海藻糖的初始浓度如何。然而,发现初始海藻糖浓度对基于细胞培养基的海藻糖溶液的崩溃温度的影响要大得多,特别是当海藻糖浓度小于 0.2 M 时(崩溃温度可能低至-65°C)。我们还确定,细胞密度从 1 到 1000 万个细胞/mL 和在高亚零温度(-4 和-7°C)下进行的冰种对溶液崩溃温度没有影响。然而,冰种确实会显著影响冷冻步骤中形成的冰晶形态,从而影响干燥速率。最后,当海藻糖浓度较低(<0.2 M)时,填充剂(甘露醇)会显著影响崩溃温度。然而,在用于活细胞冷冻干燥的溶液中,使用高浓度的海藻糖来提高崩溃温度可能比添加填充剂更可取。我们还使用扫描电子显微镜(SEM)数据进一步证实了使用 FDM 系统测量的小尺寸(2 μL)样品的崩溃温度在大规模(1 mL)样品冷冻干燥中的适用性。综上所述,本研究报告的结果应为开发在环境温度下用于活细胞冷冻保存的最佳冷冻干燥方案提供有用的指导,以方便最终用户的维护和方便的广泛分布,这对现代基于细胞的医学的最终成功很重要。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验