Trimed Eye Center, 190 Cundles Road, East Suite 100c, Barrie, Ontario L4M 4S5, Canada.
J Cataract Refract Surg. 2010 Feb;36(2):242-6. doi: 10.1016/j.jcrs.2009.08.032.
To evaluate the power use, chamber stability, and surgical efficiency of a phacoemulsification system when cataracts were graded preoperatively using the Pentacam Nucleus Grading System (PNS) and adjustments were made in phaco parameters based on the cataract grade.
Royal Victoria Hospital, Barrie, Ontario, Canada.
Cataracts were graded using Scheimpflug imaging (Pentacam) in consecutive patients. In Group 1, surgery was performed with no change in parameters. In Group 2, adjustments were made preoperatively in fluidics and phaco power to reflect the cataract grade determined by Scheimpflug imaging. Parameters assessed in both groups included effective phaco time (EPT), balanced salt solution (BSS) use, and needle time to remove the cataract.
There were 200 patients in each group. Emulsification and aspiration of higher and lower grades of cataract took statistically significantly less EPT and BSS in Group 2 (preoperative parameter adjustments) than in Group 1. The needle time for the higher grades of cataract was statistically significantly less in Group 2. For cataracts of a middle grade (2 to 3; 63% of cases), there was no statistically significant difference between standard phaco settings and adjusted settings. The cataract was effectively aspirated in both groups.
Preoperatively adjusting phaco parameters based on cataract grade helped improve overall efficiency by reducing the amount of energy and fluid used in the eye and reducing overall phaco time.
评估白内障术前使用 Pentacam 核分级系统(PNS)分级后,调整白内障参数以适应白内障分级时,超声乳化系统的能量使用、腔室稳定性和手术效率。
加拿大安大略省巴里的皇家维多利亚医院。
连续患者采用 Scheimpflug 成像(Pentacam)对白内障进行分级。在第 1 组中,手术参数未作任何改变。在第 2 组中,术前根据 Scheimpflug 成像确定的白内障分级调整液流和超声乳化功率。在两组中评估的参数包括有效超声乳化时间(EPT)、平衡盐溶液(BSS)的使用以及去除白内障的针头时间。
每组有 200 例患者。第 2 组(术前参数调整)的高、低分级白内障乳化和抽吸所需的 EPT 和 BSS 明显少于第 1 组。第 2 组高分级白内障的针头时间明显减少。对于中分级白内障(2 至 3 级;占病例的 63%),标准超声乳化设置与调整后的设置之间没有统计学差异。两组的白内障均能有效吸出。
根据白内障分级术前调整超声乳化参数有助于通过减少眼内能量和液体的使用量以及减少总超声乳化时间来提高整体效率。