Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, MB, Canada.
Nanotechnology. 2010 Apr 2;21(13):134003. doi: 10.1088/0957-4484/21/13/134003. Epub 2010 Mar 8.
Dynamic resistive memory devices based on a conjugated polymer composite (PPy(0)DBS(-)Li(+) (PPy: polypyrrole; DBS(-): dodecylbenzenesulfonate)), with field-driven ion migration, have been demonstrated. In this work the dynamics of these systems has been investigated and it has been concluded that increasing the applied field can dramatically increase the rate at which information can be 'written' into these devices. A conductance model using space charge limited current coupled with an electric field induced ion reconfiguration has been successfully utilized to interpret the experimentally observed transient conducting behaviors. The memory devices use the rising and falling transient current states for the storage of digital states. The magnitude of these transient currents is controlled by the magnitude and width of the write/read pulse. For the 500 nm length devices used in this work an increase in 'write' potential from 2.5 to 5.5 V decreased the time required to create a transient conductance state that can be converted into the digital signal by 50 times. This work suggests that the scaling of these devices will be favorable and that 'write' times for the conjugated polymer composite memory devices will decrease rapidly as ion driving fields increase with decreasing device size.
基于共轭聚合物复合材料(PPy(0)DBS(-)Li(+)(PPy:聚吡咯;DBS(-):十二烷基苯磺酸盐))的动态电阻存储器件,具有场驱动离子迁移的功能,已经得到了证明。在这项工作中,研究了这些系统的动力学,并得出结论,增加施加的电场可以极大地提高信息“写入”这些器件的速度。使用空间电荷限制电流和电场诱导的离子重排相结合的电导模型,成功地解释了实验观察到的瞬态导电行为。存储器件使用上升和下降瞬态电流状态来存储数字状态。这些瞬态电流的大小由写入/读取脉冲的幅度和宽度控制。对于本工作中使用的 500nm 长度器件,将“写入”电位从 2.5V 增加到 5.5V,将创建瞬态电导状态所需的时间缩短了 50 倍,该瞬态电导状态可以转换为数字信号。这项工作表明,这些器件的缩放将是有利的,并且随着离子驱动场随着器件尺寸的减小而增加,共轭聚合物复合存储器件的“写入”时间将迅速缩短。