Suppr超能文献

上颌中切牙锥形束 CT 测量用于确定面牙槽骨宽度≥2mm 的患病率。

Cone beam computed tomographic measurement of maxillary central incisors to determine prevalence of facial alveolar bone width ≥2 mm.

机构信息

University of Southern California School of Dentistry, Los Angeles, CA 90089-0641, USA.

出版信息

Clin Implant Dent Relat Res. 2012 Aug;14(4):595-602. doi: 10.1111/j.1708-8208.2010.00287.x. Epub 2010 May 11.

Abstract

BACKGROUND

The initial thickness of maxillary bone has significant impact on the responding level of facial bone and soft tissue after extraction and immediate implant placement. A prevailing notion is that following implant placement in fresh extraction sites, at least 2 mm of facial bone is needed to prevent soft tissue recession, fenestration, and dehiscence.

PURPOSE

The purpose of this study was to use cone beam computed tomography (CBCT) to measure horizontal width of facial alveolar bone overlying healthy maxillary central incisors and to determine prevalence of bone thickness ≥2 mm.

MATERIALS AND METHODS

Tomographic data from 101 randomly selected patients were evaluated by two independent observers. Assessments were made of facial bone width at levels 1.0 to 10.0 mm apical to the bone crest.

RESULTS

Healthy maxillary central incisors (n= 202) were measured from 101 patient scans. The percent of teeth with facial bone ≥2 mm at levels 1, 2, 3, 4, and 5 mm from the bone crest was 0, 1.5, 2.0, 3.0, and 2.5%, respectively. Overall mean thickness of the bone was 1.05 mm for right and left central incisors combined. The range of individual measurements for all levels was 0 to 5.1 mm. The occurrence of ≥ 2 mm thickness bone measurements increased with increasing depth. However, mean widths observed at levels 6 to 10 mm from the crest ranged only 1.0 to 1.3 mm because of apparent fenestration occurrence (0 mm bone) in approximately 12% of teeth. Overall, no significant differences in bone thickness were found between ethnic, gender, age, or scan groups.

CONCLUSIONS

Using CBCT, occurrences of ≥2 mm maxillary facial alveolar bone were found on no more than 3% of root surfaces 1.0 to 5.0 mm apical to the bone crest in this sample of maxillary central incisors. The study evidenced prevalence of a thin facial alveolar bone (<2 mm) that may contribute to risk of facial bone fenestration, dehiscence, and soft tissue recession after immediate implant therapy.

摘要

背景

上颌骨的初始厚度对面部骨骼和软组织在拔牙后即刻种植体植入后的反应水平有重要影响。一种流行的观点是,在新鲜拔牙部位植入种植体后,至少需要 2 毫米的牙槽骨来防止软组织退缩、开窗和裂开。

目的

本研究旨在使用锥形束 CT(CBCT)测量健康上颌中切牙上方的牙槽骨颊侧水平宽度,并确定骨厚度≥2 毫米的发生率。

材料和方法

对 101 名随机患者的断层数据由两名独立观察者进行评估。评估了牙槽嵴顶上方 1.0 至 10.0 毫米处颊侧骨宽度。

结果

从 101 例患者的扫描中测量了 202 颗健康上颌中切牙。牙槽骨厚度≥2 毫米的牙齿百分比在牙槽嵴顶上方 1、2、3、4 和 5 毫米处分别为 0、1.5、2.0、3.0 和 2.5%。左右中切牙联合的骨总体平均厚度为 1.05 毫米。所有水平的个体测量范围为 0 至 5.1 毫米。随着深度的增加,≥2 毫米厚骨测量的发生增加。然而,由于约 12%的牙齿出现明显的开窗(0 毫米骨),在牙槽嵴顶上方 6 至 10 毫米处观察到的平均宽度仅为 1.0 至 1.3 毫米。总体而言,在种族、性别、年龄或扫描组之间,骨厚度无显著差异。

结论

在本上颌中切牙样本中,使用 CBCT,在牙槽嵴顶上方 1.0 至 5.0 毫米处,仅有不超过 3%的根面出现≥2 毫米的上颌颊侧牙槽骨。该研究表明,存在薄的颊侧牙槽骨(<2 毫米),这可能导致即刻种植治疗后面部骨开窗、裂开和软组织退缩的风险增加。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验