Department of Anatomy, Sri Aurobindo Institute of Medical Sciences, Indore-Ujjain Highway, Bhawrasala Indore, Madhya Pradesh, India.
Clin Anat. 2010 Sep;23(6):707-11. doi: 10.1002/ca.21009.
Weight transmitted from the fifth lumbar vertebrae to the sacrum is distributed as three separate components between (a) the vertebral bodies anteriorly, (b) the transverse elements intermediately, and (c) the lumbosacral facet joints, posteriorly. The posterior components of the fifth lumbar vertebra share greater proportion of load in comparison with the posterior elements of the upper lumbar vertebral levels. This study focuses on rudimentary lumbosacral facet articulations and their possible effects on load sharing at this region. Twenty sacra bearing rudimentary articulations were collected for analysis. Sixteen of these sacra presented unilateral rudimentary facets, and the remaining four had facets that were bilaterally rudimentary. Thirteen of the sacra with unilateral rudimentary facets showed an accessory articulating area on the upper surface of the ala on the same side as the rudimentary zygapophyseal facet. The remaining three sacra (out of the 16) showed evidence of strong ligamentous attachments between the L5 and S1 transverse elements on the sides of the rudimentary facets. All the sacra with bilateral rudimentary facets demonstrated bilateral accessory L5-S1 articulations. These observations indicated that load transmission at lumbosacral junctions bearing a rudimentary facet joint is not normal and that their associations with strong L5-S1 lumbosacral ligamentous attachments or accessory articulations at the transverse elements serve a compensatory mechanism for load sharing.
(a) 椎体前部,(b) 中部的横突,和(c) 后部的腰骶关节面。与上腰椎水平的后部元素相比,第五腰椎的后部成分分担了更大比例的负荷。本研究关注原始的腰骶关节及其在该区域负荷分配中的可能影响。收集了 20 个带有原始关节的骶骨进行分析。其中 16 个骶骨表现出单侧原始关节,其余 4 个骶骨双侧原始关节。在具有单侧原始关节的 13 个骶骨中,在同一侧的翼突上表面有一个附加的关节区域。在剩余的 3 个骶骨(16 个中的 3 个)中,在原始关节面的侧面观察到 L5 和 S1 横突之间有很强的韧带附着。所有具有双侧原始关节的骶骨均表现出双侧 L5-S1 附加关节。这些观察结果表明,承载原始关节面的腰骶关节处的载荷传递不正常,并且它们与 L5-S1 腰骶韧带的强附着或横突上的附加关节的关联是一种用于载荷分配的代偿机制。