Center for Commercialization of Fluorescence Technologies, Dept. of Molecular Biology & Immunology, UNTHSC, Fort Worth, Texas 76107, USA.
Appl Spectrosc. 2010 Aug;64(8):918-22. doi: 10.1366/000370210792081000.
We studied the fluorescence properties of several potential picosecond lifetime standards suitable for two-photon excitation from a Ti:sapphire femtosecond laser. The fluorescence emission of the selected fluorophores (rose bengal, pyridine 1, and LDS 798) covered the visible to near-infrared wavelength range from 550 to 850 nm. We suggest that these compounds can be used to measure the appropriate instrument response functions needed for accurate deconvolution of fluorescence lifetime data. Lifetime measurements with multiphoton excitation that use scatterers as a reference may fail to properly resolve fluorescence intensity decays. This is because of the different sensitivities of photodetectors in different spectral regions. Also, detectors often lose sensitivity in the near-infrared region. We demonstrate that the proposed references allow a proper reconvolution of measured lifetimes. We believe that picosecond lifetime standards for two-photon excitation will find broad applications in multiphoton spectroscopy and in fluorescence lifetime imaging microscopy (FLIM).
我们研究了几种适用于钛宝石飞秒激光双光子激发的潜在皮秒寿命标准的荧光特性。所选荧光团(玫瑰红、吡啶 1 和 LDS 798)的荧光发射涵盖了从 550nm 到 850nm 的可见近红外波长范围。我们建议这些化合物可用于测量准确反卷积荧光寿命数据所需的适当仪器响应函数。使用散射体作为参考的多光子激发的寿命测量可能无法正确分辨荧光强度衰减。这是因为不同光谱区域的光电探测器的灵敏度不同。此外,探测器在近红外区域通常会失去灵敏度。我们证明,所提出的参考标准允许对测量寿命进行适当的重新卷积。我们相信,用于双光子激发的皮秒寿命标准将在多光子光谱学和荧光寿命成像显微镜(FLIM)中得到广泛应用。