Laboratory for Molecular and Functional Imaging: From Physiology to Therapy, UMR 5231 CNRS/University Bordeaux 2, 146 Rue Leo Saignat, Bordeaux, France.
Magn Reson Med. 2010 Dec;64(6):1704-12. doi: 10.1002/mrm.22548. Epub 2010 Sep 27.
Magnetic resonance imaging-guided high intensity focused ultrasound is a promising method for the noninvasive ablation of pathological tissue in abdominal organs such as liver and kidney. Due to the high perfusion rates of these organs, sustained sonications are required to achieve a sufficiently high temperature elevation to induce necrosis. However, the constant displacement of the target due to the respiratory cycle render continuous ablations challenging, since dynamic repositioning of the focal point is required. This study demonstrates subsecond 3D high intensity focused ultrasound-beam steering under magnetic resonance-guidance for the real-time compensation of respiratory motion. The target is observed in 3D space by coupling rapid 2D magnetic resonance-imaging with prospective slice tracking based on pencil-beam navigator echoes. The magnetic resonance-data is processed in real-time by a computationally efficient reconstruction pipeline, which provides the position, the temperature and the thermal dose on-the-fly, and which feeds corrections into the high intensity focused ultrasound-ablator. The effect of the residual update latency is reduced by using a 3D Kalman-predictor for trajectory anticipation. The suggested method is characterized with phantom experiments and verified in vivo on porcine kidney. The results show that for update frequencies of more than 10 Hz and latencies of less then 114 msec, temperature elevations can be achieved, which are comparable to static experiments.
磁共振引导高强度聚焦超声是一种有前途的方法,可用于非侵入性消融腹部器官(如肝和肾)中的病理性组织。由于这些器官的高灌注率,需要持续的超声振动才能达到足够高的温度升高以诱导坏死。然而,由于呼吸周期导致目标不断位移,因此连续消融具有挑战性,因为需要动态重新定位焦点。本研究展示了在磁共振引导下的亚秒级 3D 高强度聚焦超声束转向,以实时补偿呼吸运动。通过快速耦合二维磁共振成像和基于铅笔束导航回波的前瞻性切片跟踪,在 3D 空间中观察目标。磁共振数据通过计算高效的重建管道实时处理,该管道实时提供位置、温度和热剂量,并将校正值反馈给高强度聚焦超声消融器。通过使用 3D 卡尔曼预测器进行轨迹预测,可以减少残余更新延迟的影响。该方法通过体模实验进行了表征,并在猪肾上进行了体内验证。结果表明,对于更新频率高于 10 Hz 和延迟低于 114 msec 的情况,可以实现温度升高,与静态实验相当。