Kobara Kenichi, Shinkoda Koichi, Watanabe Susumu, Eguchi Atsuko, Fujita Daisuke, Nishimoto Tetsuya
Department of Rehabilitation, Faculty of Health Science and Technology, Kawasaki University of Medical Welfare, 288 Matsushima, Kurashiki, Okayama 701-0193, Japan.
Disabil Rehabil Assist Technol. 2011;6(4):299-304. doi: 10.3109/17483107.2010.522683. Epub 2010 Oct 14.
The purpose of the present study was to investigate the validity of a model for estimating shear force on the buttocks of elderly people with kyphosis.
The subjects with kyphosis were 10 elderly people in a facility providing health care services for the elderly. The shear force was measured using a force plate and, simultaneously, the position of the resultant centre of mass of the upper body and the inclination angle of the trunk were measured. The estimated shear force was calculated by substituting these values in the model.
The average value of the measured shear force was 8.4 SD 1.4 [%BW], and the average value of the estimated shear force was 5.8 SD 1.0 [%BW]. Although there was a significant difference between these two values (p < 0.01), there was a strong positive correlation between them (r = 0.786, p < 0.01). The regression line between the two values was y = 1.097x + 1.96, where x = estimated value, y = measured value.
These results suggest that the estimated shear force was close to the measured shear force and thus is approximately known by substituting the calculated values for the linear regression.
本研究旨在调查一种用于估计驼背老年人臀部剪切力的模型的有效性。
患有驼背的受试者为10名在为老年人提供医疗保健服务的机构中的老年人。使用测力板测量剪切力,同时测量上半身质心的位置和躯干的倾斜角度。通过将这些值代入模型来计算估计的剪切力。
测量的剪切力平均值为8.4±1.4 [%体重],估计的剪切力平均值为5.8±1.0 [%体重]。尽管这两个值之间存在显著差异(p<0.01),但它们之间存在很强的正相关性(r = 0.786,p<0.01)。这两个值之间的回归线为y = 1.097x + 1.96,其中x =估计值,y =测量值。
这些结果表明,估计的剪切力接近测量的剪切力,因此通过将计算值代入线性回归可以大致得知。