Suppr超能文献

使用多台立体相机对 3D 乳房成像系统的准确性和可重复性进行调查。

Investigation into accuracy and reproducibility of a 3D breast imaging system using multiple stereo cameras.

机构信息

Biotechnology and Craniofacial Sciences Research Group, Glasgow University, Glasgow G4 0SF, UK.

出版信息

J Plast Reconstr Aesthet Surg. 2011 May;64(5):577-82. doi: 10.1016/j.bjps.2010.08.044. Epub 2010 Oct 13.

Abstract

BACKGROUND

The aim of this study was to evaluate the validity of a three-dimensional (3D) multiple stereo camera system for objective breast assessment.

METHODS

A multiple stereo camera system, which consisted of four pods and eight cameras, two cameras on each pod, developed by Glasgow University, was used. Nine specially shaped plaster breast models were captured once, 3Dmodels were constructed and the volume of each plaster model was measured 10 times by the breast analysis tool (BAT) software. A comparison was conducted with water displacement method, and measurements were repeated 10 times. The breast of six live volunteers was captured six times; from each breast capture, a 3D model was constructed and the volume was measured with BAT software. Breast volume assessment by the water displacement method was repeated six times.

RESULTS

In all plaster casts, the discrepancies in volume measurements between 3D imaging and water displacement methods did not exceed 40 cc. The overall mean relative difference was 5%. The differences of the two methods were not significant at p = 0.189, overall mean difference: 11.1 cc and 95% confidence interval (CI) was (-6.732, 28.976). In the live models, the differences in breast volume measurements between the 3D imaging and water displacement methods were significant at p ≤ 0.017, overall mean difference: 207.05 cc and 95% CI (56.12, 357.98). Measurements by 3D imaging were consistently smaller. In the live models, 3D imaging overall was a more reproducible method for measuring breast volume than the water displacement method with a standard deviation of 36 units cc(-1) and 62.6 units cc(-1), respectively.

CONCLUSIONS

The 3D breast imaging system using multiple stereo cameras was accurate for measuring the volumes of breast-shaped plaster models, and it was more reproducible than the water displacement method in live models. 3D imaging is a reliable method for the comparative assessment of breast volume.

摘要

背景

本研究旨在评估一种三维(3D)多立体相机系统用于客观乳房评估的有效性。

方法

使用格拉斯哥大学开发的由四个吊舱和八个相机组成的多立体相机系统。一次捕获九个特殊形状的石膏乳房模型,构建 3D 模型,并使用乳房分析工具(BAT)软件测量每个石膏模型的体积 10 次。与水置换法进行比较,重复测量 10 次。六名活体志愿者的乳房被捕获六次;从每次乳房捕获中,构建一个 3D 模型,并使用 BAT 软件测量体积。水置换法重复测量乳房体积 6 次。

结果

在所有石膏模型中,3D 成像和水置换法测量体积的差异不超过 40cc。总体平均相对差异为 5%。两种方法的差异在 p = 0.189 时无统计学意义,总体平均差异:11.1cc,95%置信区间(CI)为(-6.732,28.976)。在活体模型中,3D 成像和水置换法测量乳房体积的差异在 p ≤ 0.017 时具有统计学意义,总体平均差异:207.05cc,95%CI(56.12,357.98)。3D 成像测量值始终较小。在活体模型中,3D 成像整体上是一种比水置换法更能准确测量乳房体积的方法,其标准差分别为 36 单位 cc(-1)和 62.6 单位 cc(-1)。

结论

使用多立体相机的 3D 乳房成像系统可准确测量乳房形状的石膏模型体积,在活体模型中比水置换法更具可重复性。3D 成像可作为一种可靠的方法,用于乳房体积的比较评估。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验