Bond strength of soft liners to fiber-reinforced denture-base resin.

PURPOSE

This study evaluated bond strengths of four soft liners to fiber-reinforced (FR) and unreinforced poly methyl(methacrylate) (PMMA) denture-base resin.

MATERIALS AND METHODS

The autopolymerized denture-base resin Palapress Vario (Heraus Kulzer GmbH, Hanau, Germany) was used as the substrate (15 × 15 × 5 mm³). The test group consisted of substrates reinforced with porous PMMA preimpregnated unidirectional glass fibers (Stick [StickTech, Turku, Finland]) (PMMA + FR group), and the control group was unreinforced acrylic resin (PMMA group) (n = 80 per group). One of four soft liners (Ufi Gel SC [Voco, Cuxhaven, Germany], Sofreliner Tough [Tokuyama Dental Corporation, Tokyo, Japan], Vertex SoftSil 25 [Vertex-Dental B.V., Zeist, The Netherlands], and Eversoft [Dentsply Austenal, York, PA]) was placed and cured between two substrates using a polyethylene ring (10 mm inner radius, 3 mm height). Tensile bond strength tests (crosshead speed = 10 mm/min) were performed, and the results were analyzed using analysis of variance followed by Tukey's test (p= 0.05). Fracture surfaces were categorized as adhesive or cohesive-mixed modes, and failure types were statistically analyzed using chi-square test.

RESULTS

FR did not affect the bond strength results significantly (p > 0.05) except for Ufi Gel SC. Significant differences in bond strength were found among the reline materials (p < 0.001). FR specimens showed a significantly higher number of cohesive-mixed fractures compared to unreinforced specimens (p < 0.05), except for plasticized acrylic-based reline material (Eversoft [Dentsply Austenal]), which showed fewer cohesive-mixed failures with FR.

CONCLUSIONS

The choice of appropriate reline material system with FR acrylic resin is important for the soft liner/denture-base polymer bond. Glass FR did not have a decreasing effect on the bond strength, except for Ufi Gel SC.