Suppr超能文献

采用团注追踪技术进行64排螺旋CT血管造影以实现健康肝脏动脉期成像:定量评分与定性评分之间是否存在相关性?

Sixty-four-multidetector-row computed tomography angiography with bolus tracking to time arterial-phase imaging in healthy liver: is there a correlation between quantitative and qualitative scores?

作者信息

Osimani Marcello, Rengo Marco, Paolantonio Pasquale, Ferrari Riccardo, De Cecco Carlo Nicola, Bellini Davide, Maceroni Marco Maria, Laghi Andrea

机构信息

Department of Radiological Sciences, Sapienza University of Rome-Polo Pontino, Latina, Italy.

出版信息

J Comput Assist Tomogr. 2010 Nov-Dec;34(6):883-91. doi: 10.1097/RCT.0b013e3181dd80c8.

Abstract

PURPOSE

To determine the optimal 64-multidetector-row computed tomography scan delay from bolus-tracking trigger for the arterial phase and the evaluation of vascularization in healthy liver.

MATERIALS AND METHODS

One hundred twenty patients are randomized into 3 groups according to scan delay (5-, 10-, 15-second arterial phase) and underwent CT of the liver. Images were evaluated on the basis of quantitative and qualitative scores. A correlation analysis between them was managed to find the most effective scan delay for best radiologists' diagnostically performances.

RESULTS

Scanning too early results in images that are acquired before the vascular peak enhancement while scanning to late results in the increasing of liver parenchyma portal feeding. Good performances were obtained with a scan delay ranging between 10 and 19 seconds from the trigger.

CONCLUSIONS

When a 64-multidetector-row computed tomography with a bolus-tracking program is used, only 1 arterial phase should be acquired, setting a scan delay of 10 to 19 seconds.

摘要

目的

确定基于团注追踪触发的动脉期64排多层螺旋CT扫描的最佳延迟时间,并评估健康肝脏的血管化情况。

材料与方法

120例患者根据扫描延迟时间(动脉期5秒、10秒、15秒)随机分为3组,然后接受肝脏CT检查。根据定量和定性评分对图像进行评估。对两者进行相关性分析,以找出对放射科医生最佳诊断表现最有效的扫描延迟时间。

结果

扫描过早会导致在血管峰值强化之前采集图像,而扫描过晚则会导致肝实质门静脉供血增加。触发后10至19秒的扫描延迟可获得良好的图像质量。

结论

当使用带有团注追踪程序的64排多层螺旋CT时,仅应采集1个动脉期图像,设置扫描延迟时间为10至19秒。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验