State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Province Key Laboratory of Display Material and Technology, School of Physics and Engineering, Sun Yat-sen University, Guangzhou, 510275, PR China.
Nanoscale. 2011 Feb;3(2):610-8. doi: 10.1039/c0nr00586j. Epub 2010 Nov 22.
The controlled synthesis of different growth densities of ultra-long AlN nanowires has been successfully realized by nitridation of Al powders for the first time. These AlN nanowires have an average diameter of about 100 nm and their mean length is over 50 μm. All the synthesized ultra-long nanowires are pure single crystalline h-AlN structures with a growth orientation of [0001]. We preferred the self-catalyzing vapor-liquid-solid (VLS) mechanism to illustrate their growth process. Although the sample with the middle growth density (3.2×10(7) per cm2) of AlN nanowire performs the best field emission (FE) properties, the emission uniformity is not good enough for field emission display applications, which may be attributed to their low intrinsic conductivity. Moreover, the electrical transport and FE properties of an individual ultra-long AlN nanowire are further investigated in situ to find the decisive factor responsible for their FE behaviors. An individual AlN nanowire is observed to have a mean 1 nA field of 440 V μm(-1) and 1 μA field of 480 V μm(-1) as well as an average electrical conductivity of about 2.7×10(-4)Ω(-1) cm(-1), which is lower than that of some cathode materials with excellent FE properties. Therefore we come to the conclusion that the electrical conductivity of the AlN nanowire must be improved to a higher level by some effective ways in order to realize their practical FE device applications.
首次通过氮化铝粉末成功实现了不同生长密度的超长氮化铝纳米线的可控合成。这些氮化铝纳米线的平均直径约为 100nm,平均长度超过 50μm。所有合成的超长纳米线均为纯单晶 h-AlN 结构,具有[0001]的生长方向。我们倾向于用自催化的气-液-固(VLS)机制来解释它们的生长过程。尽管具有中间生长密度(3.2×10^7 根/cm^2)的氮化铝纳米线样品具有最佳的场发射(FE)性能,但发射均匀性对于场发射显示应用来说还不够好,这可能归因于它们的低本征导电性。此外,还进一步原位研究了单个超长氮化铝纳米线的输运和 FE 性能,以找出影响其 FE 行为的决定性因素。观察到单个氮化铝纳米线的平均场发射电流密度为 440V/μm,场发射电流密度为 480V/μm,平均电导率约为 2.7×10^-4Ω^-1cm^-1,低于某些具有优异 FE 性能的阴极材料的电导率。因此,我们得出结论,为了实现实际的 FE 器件应用,必须通过一些有效途径将氮化铝纳米线的电导率提高到更高水平。