Flemming C A, Ferris F G, Beveridge T J, Bailey G W
Department of Microbiology, College of Biological Sciences, University of Guelph, Ontario, Canada.
Appl Environ Microbiol. 1990 Oct;56(10):3191-203. doi: 10.1128/aem.56.10.3191-3203.1990.
Significant quantities of Ag(I), Cu(II), and Cr(III) were bound to isolated Bacillus subtilis 168 walls, Escherichia coli K-12 envelopes, kaolinite and smectite clays, and the corresponding organic material-clay aggregates (1:1, wt/wt). These sorbed metals were leached with HNO3, Ca(NO3)2, EDTA, fulvic acid, and lysozyme at several concentrations over 48 h at room temperature. The remobilization of the sorbed metals depended on the physical properties of the organic and clay surfaces and on the character and concentration of the leaching agents. In general, the order of remobilization of metals was Cr much less than Ag less than Cu. Cr was very stable in the wall, clay, and composite systems; pH 3.0, 500 microM EDTA, 120-ppm [mg liter-1] fulvic acid, and 160-ppm Ca remobilized less than 32% (wt/wt) of sorbed Cr. Ag (45 to 87%) and Cu (up to 100%) were readily removed by these agents. Although each leaching agent was effective at mobilizing certain metals, elevated Ca or acidic pH produced the greatest overall mobility. The organic chelators were less effective. Lysozyme digestion of Bacillus walls remobilized Cu from walls and Cu-wall-kaolinite composites, but Ag, Cr, and smectite partially inhibited enzyme activity, and the metals remained insoluble. The extent of metal remobilization was not always dependent on increasing concentrations of leaching agents; for example, Ag mobility decreased with some clays and some composites treated with high fulvic acid, EDTA, and lysozyme concentrations. Sometimes the organic material-clay composites reacted in a manner distinctly different from that of their individual counterparts; e.g., 25% less Cu was remobilized from wall- and envelope-smectite composites than from walls, envelopes, or smectite individually in 500 microM EDTA. Alternatively, treatment with 160-ppm Ca removed 1.5 to 10 times more Ag from envelope-kaolinite composites than from the individual components. The particle size of the deposited metal may account for some of the stability changes; those metals that formed large, compact aggregates (Cr and Ag) as seen by transmission electron microscopy were less likely to be remobilized. In summary, it is apparent that remobilization of toxic heavy metals in sediments, soils, and the vadose zone is a complicated issue. Predictions based on single inorganic or organic component systems are too simplistic.
大量的Ag(I)、Cu(II)和Cr(III)与分离出的枯草芽孢杆菌168细胞壁、大肠杆菌K-12细胞膜、高岭土和蒙脱石黏土以及相应的有机物质-黏土聚集体(质量比1:1)结合。在室温下,用不同浓度的硝酸、硝酸钙、乙二胺四乙酸(EDTA)、富里酸和溶菌酶对这些吸附的金属进行了48小时的浸出。吸附金属的再迁移取决于有机和黏土表面的物理性质以及浸出剂的特性和浓度。一般来说,金属再迁移的顺序是Cr远小于Ag小于Cu。Cr在细胞壁、黏土和复合体系中非常稳定;pH值为3.0、500微摩尔/升的EDTA、120毫克/升(ppm)的富里酸和160毫克/升的钙只能使吸附的Cr再迁移出不到32%(质量比)。这些试剂能轻易去除Ag(45%至87%)和Cu(高达100%)。尽管每种浸出剂在使某些金属迁移方面都有效,但钙浓度升高或酸性pH值能产生最大的总体迁移率。有机螯合剂的效果较差。枯草芽孢杆菌细胞壁经溶菌酶消化后,能使细胞壁和细胞壁-高岭土复合材料中的Cu再迁移,但Ag、Cr和蒙脱石会部分抑制酶的活性,金属仍不溶解。金属再迁移的程度并不总是取决于浸出剂浓度的增加;例如,对于某些黏土和用高浓度富里酸、EDTA和溶菌酶处理的某些复合材料,Ag的迁移率会降低。有时,有机物质-黏土复合材料的反应方式与其单独的对应物明显不同;例如,在500微摩尔/升的EDTA中,从细胞壁-和细胞膜-蒙脱石复合材料中再迁移出的Cu比从细胞壁、细胞膜或蒙脱石中单独再迁移出的少25%。另外,用160毫克/升的钙处理时,从细胞膜-高岭土复合材料中去除的Ag比从单个组分中去除的多1.5至10倍。沉积金属的粒径可能是稳定性变化的部分原因;通过透射电子显微镜观察到,那些形成大的、紧密聚集体的金属(Cr和Ag)不太可能再迁移。总之,很明显,沉积物、土壤和包气带中有毒重金属的再迁移是一个复杂的问题。基于单一无机或有机组分体系的预测过于简单。