Suppr超能文献

采用低重聚焦翻转角 Carr-Purcell-Meiboom-Gill 序列的在线核磁共振定性分析。

Qualitative analysis by online nuclear magnetic resonance using Carr-Purcell-Meiboom-Gill sequence with low refocusing flip angles.

机构信息

Instituto de Química de São Carlos, Universidade de São Paulo, Av. Trabalhador São-carlense 400, São Carlos 13560-970, SP, Brazil.

出版信息

Talanta. 2011 Mar 15;84(1):84-8. doi: 10.1016/j.talanta.2010.12.033. Epub 2010 Dec 25.

Abstract

The Carr-Purcell-Meiboom-Gill (CPMG) pulse sequence has been used in many applications of magnetic resonance imaging (MRI) and low-resolution NMR (LRNMR) spectroscopy. Recently, CPMG was used in online LRNMR measurements that use long RF pulse trains, causing an increase in probe temperature and, therefore, tuning and matching maladjustments. To minimize this problem, the use of a low-power CPMG sequence based on low refocusing pulse flip angles (LRFA) was studied experimentally and theoretically. This approach has been used in several MRI protocols to reduce incident RF power and meet the specific absorption rate. The results for CPMG with LRFA of 3π/4 (CPMG(135)), π/2 (CPMG(90)) and π/4 (CPMG(45)) were compared with conventional CPMG with refocusing π pulses. For a homogeneous field, with linewidth equal to Δυ=15 Hz, the refocusing flip angles can be as low as π/4 to obtain the transverse relaxation time (T(2)) value with errors below 5%. For a less homogeneous magnetic field, Δυ=100 Hz, the choice of the LRFA has to take into account the reduction in the intensity of the CPMG signal and the increase in the time constant of the CPMG decay that also becomes dependent on longitudinal relaxation time (T(1)). We have compared the T(2) values measured by conventional CPMG and CPMG(90) for 30 oilseed species, and a good correlation coefficient, r=0.98, was obtained. Therefore, for oilseeds, the T(2) measurements performed with π/2 refocusing pulses (CPMG(90)), with the same pulse width of conventional CPMG, use only 25% of the RF power. This reduces the heating problem in the probe and reduces the power deposition in the samples.

摘要

卡尔普塞尔-珀塞尔-米博姆-吉尔(CPMG)脉冲序列已在磁共振成像(MRI)和低分辨率 NMR(LRNMR)光谱学的许多应用中使用。最近,CPMG 被用于在线 LRNMR 测量中,这些测量使用长射频脉冲序列,导致探头温度升高,从而导致调谐和匹配失调。为了最小化这个问题,研究了基于低重聚焦脉冲翻转角(LRFA)的低功率 CPMG 序列的实验和理论应用。这种方法已在几种 MRI 协议中用于降低入射射频功率并满足特定吸收率。比较了具有 3π/4(CPMG(135))、π/2(CPMG(90))和 π/4(CPMG(45))LRFA 的 CPMG 与具有重聚焦π脉冲的传统 CPMG 的结果。对于均匀场,线宽等于 Δυ=15 Hz,重聚焦翻转角可以低至 π/4,以获得误差低于 5%的横向弛豫时间(T(2))值。对于不均匀磁场,Δυ=100 Hz,LRFA 的选择必须考虑到 CPMG 信号强度的降低以及 CPMG 衰减的时间常数的增加,该时间常数也取决于纵向弛豫时间(T(1))。我们比较了 30 种油籽物种的常规 CPMG 和 CPMG(90)测量的 T(2)值,得到了很好的相关系数 r=0.98。因此,对于油籽,使用相同的常规 CPMG 脉冲宽度,具有 π/2 重聚焦脉冲(CPMG(90))进行的 T(2)测量仅使用 25%的射频功率。这减少了探头中的加热问题,并减少了样品中的功率沉积。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验