Abdel Salam F W, el-Khabeary H, Ahmed M M, Abdel Reheem A M
Accelerators and Ion Sources Department, Nuclear Research Center, Atomic Energy Authority, P. No. 13759, Egypt.
Rev Sci Instrum. 2011 Mar;82(3):033304. doi: 10.1063/1.3554637.
In this work, an improved form of a saddle field ion source has been designed and constructed. It consists of four anode rods made from copper and two copper cathode discs. The two cathode discs are placed symmetrically on both sides of the four anode rods. The electrical discharge and output ion beam characteristics were measured at different pressures using argon gas. The optimum distance between each two anode rods was determined. Also the optimum distance between the four anode rods and any cathode disc was obtained. It was found that the optimum distance between each two anode rods equal to 6 mm, while the optimum distance between the four anode rods and any cathode disc equal to 16 mm, where a stable discharge current and maximum output ion beam current can be obtained. The effect of negative extraction voltage applied to both the extractor electrode and Faraday cup on the output ion beam current was studied. The sputter yield of copper and aluminum targets using argon ions of different energies was determined.
