Department of Chemistry, University of Mazandaran, Babolsar, Iran.
Anal Chim Acta. 2011 Aug 5;699(1):113-9. doi: 10.1016/j.aca.2011.04.011. Epub 2011 Apr 16.
A rapid and simple method for the extraction and preconcentration of N-methylcarbamates (NMCs) (carbofuran, carbaryl and promecarb) in water samples using dispersive liquid-liquid microextraction (DLLME) using chemometrics was developed. Influence variables such as volume of extracting (CHCl(3)) and dispersing solvents (ACN), pH and ionic strength, extraction time and centrifugation time and speed were screened in a 2(7-4) Plackett-Burman design was investigated. The significant variables were optimized by using a central composite design (CCD) combined with desirability function (DF). At optimum conditions values of variables set as 126 μL chloroform, 1.5 mL acetonitrile, 1 min extraction time, 10 min centrifugation at 4000 rpm min(-1), natural pH, 4.7% (w/v) NaCl, the separation was reached in less than 14 min using a C(18) column and an isocratic binary mobile phase (acetonitrile: water (50:50, v/v)) with flow rate of 1.0 mL min(-1). At optimum conditions method has linear response over 0.001-10 μg mL(-1) with detection limit between 0.0001 and 0.0005 μg mL(-1) with relative standard deviations (RSDs) in the range 2.18-5.06% (n=6).
采用分散液液微萃取(DLLME)并结合化学计量学方法,建立了一种快速、简便的水样中 N-甲基氨基甲酸酯(NMCs)(呋喃丹、西维因和涕灭威)提取和预浓缩的方法。通过 2(7-4) Plackett-Burman 设计考察了萃取(CHCl3)和分散溶剂(ACN)体积、pH 值和离子强度、萃取时间和离心时间和速度等影响因素。采用中心复合设计(CCD)结合可接受性函数(DF)对显著变量进行了优化。在最佳条件下,将变量值设定为 126 μL 氯仿、1.5 mL 乙腈、1 min 萃取时间、4000 rpm min(-1) 10 min 离心、自然 pH 值、4.7%(w/v)NaCl,使用 C(18)柱和等度二元流动相(乙腈:水(50:50,v/v))以 1.0 mL min(-1)的流速,可在 14 min 内实现分离。在最佳条件下,该方法在 0.001-10 μg mL(-1)范围内呈线性响应,检测限在 0.0001-0.0005 μg mL(-1)之间,相对标准偏差(RSD)在 2.18-5.06%(n=6)之间。