Suppr超能文献

低轮廓背侧与掌侧锁定钢板治疗桡骨远端骨折的并发症:一项对比研究

Complications of low-profile dorsal versus volar locking plates in the distal radius: a comparative study.

作者信息

Yu Yangyang R, Makhni Melvin C, Tabrizi Shervin, Rozental Tamara D, Mundanthanam George, Day Charles S

机构信息

Beth Israel Deaconess Medical Center and the Harvard Medical School, Boston, MA 02215, USA.

出版信息

J Hand Surg Am. 2011 Jul;36(7):1135-41. doi: 10.1016/j.jhsa.2011.04.004.

Abstract

PURPOSE

Dorsal plating of distal radius fractures with traditional 2.5-mm-thick plates is associated with extensor tendon complications. Consequently, volar locking plates have gained widespread acceptance. A new generation of 1.2- to 1.5-mm, low-profile dorsal plates was designed to minimize tendon irritation. This study examines the complication rates of low-profile dorsal plates compared with volar locking plates.

METHODS

We identified patients with distal radius fractures treated between September 2002 and June 2006 by low-profile dorsal or volar locking plates. Information pertaining to 7 categories of complications (hardware discomfort and pain, tendon irritation/rupture, failure of reduction, infection, complex regional pain syndrome, stiffness, and neuropathy/hypersensitivity) was collected. Complications were defined as any postoperative plating complications requiring additional surgical intervention, whereas those that only caused patient discomfort were considered secondary problems.

RESULTS

We included 100 patients, comprising 104 plating cases (57 dorsal, 47 volar), in this study. Overall length of follow-up was 44 ± 21 months (range, 12-80 mo). A total of 18 patients (8 dorsal, 10 volar) experienced complications, whereas 47 (25 dorsal, 22 volar) had secondary reports. Three dorsal and 4 volar patients had complete plate removals. Three dorsal and no volar plates had screw removals only. One volar plate (no dorsal plates) had a major tendon rupture (flexor pollicis longus); 3 dorsal and 3 volar plates resulted in tendon irritation complications, and 4 dorsal and 3 volar plates had secondary problems from tendon irritation. None of the above measures approached statistical significance. Volar cases were associated with significantly more neuropathic complications than dorsal cases.

CONCLUSIONS

Dorsal low-profile plates are not associated with significantly more tendon irritation or rupture complications. However, volar plating is associated with a higher rate of neuropathic complications.

TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic III.

摘要

目的

使用传统2.5毫米厚的钢板对桡骨远端骨折进行背侧钢板固定会引发伸肌腱并发症。因此,掌侧锁定钢板已获得广泛认可。新一代1.2至1.5毫米的薄型背侧钢板旨在将肌腱刺激降至最低。本研究比较了薄型背侧钢板与掌侧锁定钢板的并发症发生率。

方法

我们确定了2002年9月至2006年6月期间使用薄型背侧或掌侧锁定钢板治疗的桡骨远端骨折患者。收集了与7类并发症(内固定不适与疼痛、肌腱刺激/断裂、复位失败、感染、复杂性区域疼痛综合征、僵硬以及神经病变/感觉过敏)相关的信息。并发症定义为任何需要额外手术干预的术后钢板固定并发症,而那些仅导致患者不适的情况则被视为次要问题。

结果

本研究纳入了100例患者,共104例钢板固定病例(57例背侧,47例掌侧)。总随访时间为44±21个月(范围12 - 80个月)。共有18例患者(8例背侧,10例掌侧)出现并发症,而47例(25例背侧,22例掌侧)有次要问题报告。3例背侧和4例掌侧患者进行了完整钢板取出。3例背侧钢板和0例掌侧钢板仅进行了螺钉取出。1例掌侧钢板(无背侧钢板)发生了主要肌腱断裂(拇长屈肌);3例背侧和3例掌侧钢板出现肌腱刺激并发症,4例背侧和3例掌侧钢板因肌腱刺激存在次要问题。上述各项指标均未达到统计学意义。掌侧病例的神经病变并发症明显多于背侧病例。

结论

背侧薄型钢板引发的肌腱刺激或断裂并发症并无显著增加。然而,掌侧钢板固定与较高的神经病变并发症发生率相关。

研究类型/证据水平:治疗性III级。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验