Suppr超能文献

用于关节镜打结的编织混合缝线的结安全性、环安全性和伸长率。

Knot security, loop security, and elongation of braided polyblend sutures used for arthroscopic knots.

作者信息

Livermore Ryan W, Chong Alexander C M, Prohaska Daniel J, Cooke Francis W, Jones Teresa L

机构信息

Section of Orthopaedics, Department of Surgery, University of Kansas School of Medicine, Wichita, USA.

出版信息

Am J Orthop (Belle Mead NJ). 2010 Dec;39(12):569-76.

Abstract

In the study described here, we evaluated load to failure and cyclic loading elongation of different braided polyblend sutures under different sliding knot configurations. Four braided polyblend sutures (FiberWire, Herculine, Orthocord, Ultrabraid) were tied with 5 sliding arthroscopic knots (Static surgeon, Weston, Roeder, Nicky, Tennessee slider) with a series of 3 reversing half-hitches on alternating posts (RHAPs). Each knot was tied around a 30-mm circumference post to ensure a consistent loop circumference. Loop security was measured as load to failure (load at 3-mm cross-head displacement or suture breakage) and loop elongation at a frequency of 1 Hz from 6 N to 30 N for 1000 cycles. Twenty knots were tied for each possible combination of knots and sutures, 10 for load to failure and 10 for cyclic loading test. For any given knot type, tying with Ultrabraid suture material resulted in maximum performance in the maximum load-to-failure test. Conversely, tying with Orthocord resulted in a significantly lower maximum load to failure, with the exception of the Surgeon knot. The Weston knot with 3 RHAPs using Ultrabraid provided the highest load to failure(mean, 346 N; SD, 24 N). All knots elongated less than 0.45 mm at the 1000th cycle and experienced higher suture slippage at initial cyclic loading (50th cycles). At higher cycles, FiberWire and Orthocord demonstrated less than half of the suture slippage of Herculine and Ultrabraid (5x10(-5) vs 11x10(-5) mm/cycle). Different braided polyblend sutures provide different knot and loop security for a given type of sliding knot. All knots in this study appear to be durable with respect to resistance to loosening under cyclic loading conditions. The Weston knot with 3 RHAPs using Ultrabraid provided the best loop and knot security. Our study results help further our understanding of the biomechanics of knot and loop security differences for different braided polyblend sutures.

摘要

在本研究中,我们评估了不同编织聚混纺缝线在不同滑结构型下的断裂负荷和循环加载伸长情况。四种编织聚混纺缝线(FiberWire、Herculine、Orthocord、Ultrabraid)与5种关节镜滑结(静态外科医生结、韦斯顿结、罗德结、尼基结、田纳西滑块结)通过在交替柱上进行一系列3次反向半结(RHAPs)打结。每个结都系在一个周长为30毫米的柱子上,以确保环周长一致。环的安全性通过断裂负荷(3毫米十字头位移时的负荷或缝线断裂)以及在1赫兹频率下从6牛到30牛进行1000次循环的环伸长来测量。对于每种可能的结和缝线组合,都打20个结,其中10个用于断裂负荷测试,10个用于循环加载测试。对于任何给定的结类型,使用Ultrabraid缝线材料打结在最大断裂负荷测试中表现最佳。相反,使用Orthocord打结导致最大断裂负荷显著降低,但外科医生结除外。使用Ultrabraid的带有3个RHAPs的韦斯顿结提供了最高的断裂负荷(平均值为346牛;标准差为24牛)。在第1000次循环时,所有结的伸长均小于0.45毫米,并且在初始循环加载(第50次循环)时缝线滑动较大。在更高的循环次数下,FiberWire和Orthocord的缝线滑动小于Herculine和Ultrabraid的一半(5×10⁻⁵对11×10⁻⁵毫米/循环)。对于给定类型的滑结,不同的编织聚混纺缝线提供不同的结和环安全性。本研究中的所有结在循环加载条件下抵抗松动方面似乎都很耐用。使用Ultrabraid的带有3个RHAPs的韦斯顿结提供了最佳的环和结安全性。我们的研究结果有助于进一步加深我们对不同编织聚混纺缝线的结和环安全性差异的生物力学理解。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验