Department of Neurosurgery, Medical University Innsbruck, Innsbruck, Austria.
Neurosurgery. 2011 Dec;69(6):1307-16. doi: 10.1227/NEU.0b013e31822ba190.
Image-guided spinal instrumentation may reduce complications in spinal instrumentation.
To assess accuracy, time efficiency, and staff radiation exposure during thoracolumbar screw instrumentation guided by intraoperative computed tomography (iCT)-based neuronavigation (iCT-N).
In 55 patients treated for idiopathic and degenerative deformities, 826 screws were inserted in the thoracic (T2-T12; n = 243) and lumbosacral (L1-S1; n = 545) spine, as well as ilium (n = 38) guided by iCT-N. Up to 17 segments were instrumented following a single automated registration sequence with the dynamic reference arc (DRA) uniformly attached to L5. Accuracy of iCT-N was assessed by calculating angular deviations between individual navigated tool trajectories and final implant positions. Final screw positions were also graded according to established classification systems. Clinical and radiological outcome was assessed at 12 to 14 months.
Additional intraoperative fluoroscopy was unnecessary, eliminating staff radiation exposure. Unisegmental K-wire insertion required 4.6 ± 2.9 minutes. Of the thoracic pedicle screws 98.4% were assigned grades I to III according to the Heary classification, with 1.6% grade IV placement. In the lumbar spine, 94.4% of screws were completely contained (Gertzbein classification grade 0), 4.6% displayed minor pedicle breaches <2 mm (grade 1), and 1% of lumbar screws deviated by >2 to <4 mm (grade 2). The accuracy of iCT-N progressively deteriorates with increasing distance from the DRA, but allows safe instrumentation of up to 12 segments.
iCT-N using automated referencing allows for safe, highly accurate multilevel instrumentation of the entire thoracolumbosacral spine and ilium, rendering additional intraoperative imaging dispensable. In addition, automated registration is time-efficient and significantly reduces the need for re-registration in multilevel surgery.
影像引导下脊柱内固定可减少脊柱内固定相关并发症。
评估基于术中计算机断层扫描(iCT)的神经导航(iCT-N)引导下胸腰椎螺钉内固定的准确性、时间效率和术者辐射暴露。
55 例特发性和退行性脊柱畸形患者接受手术治疗,共置入 826 枚螺钉,胸椎(T2-T12;n=243)、胸腰段(L1-S1;n=545)和髂骨(n=38)均采用 iCT-N 引导。通过将动态参考弧(DRA)均匀地固定于 L5 椎弓根,单次自动注册序列引导最多 17 个节段的内固定。通过计算导航工具轨迹与最终植入物位置之间的角度偏差来评估 iCT-N 的准确性。根据既定的分类系统对最终螺钉位置进行分级。术后 12-14 个月评估临床和影像学结果。
无需额外的术中透视,从而避免了术者辐射暴露。单节段 K 线置入需要 4.6±2.9 分钟。胸椎椎弓根螺钉中,98.4%根据 Heary 分类被评为 I 至 III 级,1.6%为 IV 级。腰椎螺钉中,94.4%完全位于椎弓根内(Gertzbein 分级 0 级),4.6%显示轻微的椎弓根皮质穿透<2mm(Gertzbein 分级 1 级),1%的腰椎螺钉偏差>2-<4mm(Gertzbein 分级 2 级)。iCT-N 的准确性随与 DRA 距离的增加而逐渐降低,但允许安全地固定多达 12 个节段。
iCT-N 采用自动参考可实现胸腰椎和髂骨的安全、高度准确的多节段内固定,使术中额外的影像学检查变得不必要。此外,自动注册省时,可显著减少多节段手术中的重新注册需求。