Design of a new, multi-purpose, light-curing adhesive comprising a silane coupling agent, acidic adhesive monomers and dithiooctanoate monomers for bonding to varied metal and dental ceramic materials.

A newly designed, light-curing adhesive was investigated for its bonding effectiveness to porcelain, alumina, zirconia, Au, Au alloy, Ag alloy, Au-Ag-Pd alloy, and Ni-Cr alloy. Four experimental adhesives were prepared using varying contents of the following: a silane coupling agent [3-methacryloyloxypropyltriethoxysilane (3-MPTES)], acidic adhesive monomers [6-methacryloyloxyhexyl phosphonoacetate(6-MHPA),6-methacryloyloxyhexyl3-phosphonopropionate(6-MHPP)and 4-methacryloyloxyethoxycarbonylphthalic acid (4-MET)], and dithiooctanoate monomers [6-methacryloyloxyhexyl 6,8-dithiooctanoate (6-MHDT) and 10-methacryloyloxydecyl 6,8-dithiooctanoate (10-MDDT)]. After all adherend surfaces were sandblasted and applied with an experimental adhesive, shear bond strengths (SBSs) of a light-curing resin composite (Beautifil II, Shofu Inc., Kyoto, Japan) to the adherend materials after 2,000 times of thermal cycling were measured. For the experimental adhesive which contained 3-MPTES (30.0 wt%), 6-MHPA (1.0 wt%), 6-MHPP (1.0 wt%), 4-MET (1.0 wt%), 6-MHDT (0.5 wt%) and 10-MDDT (0.5 wt%), it consistently yielded the highest SBS for all adherend surfaces in the range of 20.8 (4.8)-30.3 (7.9) MPa, with no significant differences among all the adherend materials (p>0.05). Therefore, the newly designed, multi-purpose, light-curing adhesive was able to deliver high SBS to all the adherend materials tested.