Suppr超能文献

90Y 微球治疗肝细胞癌的肝脏快速三维剂量学临床可行性。

Clinical feasibility of fast 3-dimensional dosimetry of the liver for treatment planning of hepatocellular carcinoma with 90Y-microspheres.

机构信息

Department of Nuclear Medicine, Beaujon Hospital, Assistance Publique-Hôpitaux de Paris, Clichy, France.

出版信息

J Nucl Med. 2011 Dec;52(12):1930-7. doi: 10.2967/jnumed.111.095232. Epub 2011 Nov 8.

Abstract

UNLABELLED

Several treatment strategies are used for selective internal radiation therapy with (90)Y-microspheres. The diversity of approaches does not favor the standardization of the prescribed activity calculation. To this aim, a fast 3-dimensional (3D) dosimetry method was developed for (90)Y-microsphere treatment planning and was clinically evaluated retrospectively.

METHODS

Our 3D approach is based on voxel S values (VSVs) and has been implemented in the software tool VoxelDose. VSVs were previously calculated at a fine voxel size. The time-integrated activity (TIA) map is derived from pretherapeutic (99m)Tc-macroaggregated-albumin SPECT/CT. The fine VSV map is resampled at the voxel size of the TIA map. Then, the TIA map is convolved with the resampled VSV map to construct the 3D dose map. Data for 10 patients with 12 tumor sites treated by (90)Y-microspheres for hepatocellular carcinoma were collected retrospectively. 3D dose maps were computed for each patient, and tumoral liver and nontumoral liver (TL and NTL, respectively) were delineated, allowing the computation of descriptive statistics (i.e., mean absorbed dose, minimum absorbed dose, and maximum absorbed dose) and dose-volume histograms. Mean absorbed doses in TL and NTL from VoxelDose were compared with those calculated with the standard partition model.

RESULTS

The estimated processing time for a complete 3D dosimetry calculation is on the order of 15 min, including 10 s for the dose calculation (i.e., VSV resampling and convolution). An additional 45 min was needed for the semiautomatic and manual segmentation of TL and NTL. The mean absorbed dose (±SD) was 422 ± 263 Gy for TL and 50.1 ± 36.0 Gy for NTL. The comparison between VoxelDose and partition model shows a mean relative difference of 1.5% for TL and 4.4% for NTL. Results show a wide spread of voxel-dose values around mean absorbed dose. The minimum absorbed dose within TL ranges from 32 to 267 Gy (n = 12). The fraction of NTL volume irradiated with at least 80 Gy ranges from 4% to 70% (n = 10), and the absorbed dose from which 25% of NTL was the least irradiated ranges from 14 to 178 Gy.

CONCLUSION

This article demonstrates the feasibility of a fast 3D dosimetry method for (90)Y-microspheres and highlights the potential value of a 3D treatment planning strategy.

摘要

目的

为了规范(90)Y 放射性微球选择性内放射治疗的处方剂量计算,本研究开发了一种快速的三维(3D)剂量计算方法,并进行了临床回顾性评估。

方法

我们的 3D 方法基于体素 S 值(VSV),并已在软件工具 VoxelDose 中实现。VSV 是以前在精细体素尺寸上计算得到的。时间积分活度(TIA)图源自治疗前(99m)Tc-聚合白蛋白 SPECT/CT。精细 VSV 图在 TIA 图的体素尺寸上进行重采样。然后,TIA 图与重采样的 VSV 图卷积,以构建 3D 剂量图。本研究回顾性收集了 10 例 12 个肿瘤部位接受(90)Y 放射性微球治疗的肝癌患者的数据。为每位患者计算了 3D 剂量图,并描绘了肿瘤性肝组织(TL)和非肿瘤性肝组织(NTL),从而可以计算描述性统计数据(即平均吸收剂量、最小吸收剂量和最大吸收剂量)和剂量-体积直方图。VoxelDose 计算的 TL 和 NTL 的平均吸收剂量与标准分区模型计算的结果进行了比较。

结果

完整的 3D 剂量计算的估计处理时间约为 15 分钟,其中剂量计算(即 VSV 重采样和卷积)耗时 10 秒。TL 和 NTL 的半自动和手动分割各需额外 45 分钟。TL 的平均吸收剂量(±SD)为 422±263 Gy,NTL 为 50.1±36.0 Gy。VoxelDose 与分区模型的比较结果显示,TL 的平均相对差异为 1.5%,NTL 的平均相对差异为 4.4%。结果表明,体素剂量值在平均吸收剂量周围分布广泛。TL 内的最小吸收剂量范围为 32-267 Gy(n=12)。至少接受 80 Gy 照射的 NTL 体积分数范围为 4%-70%(n=10),25%的 NTL 受照射最少的吸收剂量范围为 14-178 Gy。

结论

本文证明了用于(90)Y 放射性微球的快速 3D 剂量计算方法的可行性,并强调了 3D 治疗计划策略的潜在价值。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验