Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, Massachusetts 01609, USA.
J Phys Chem B. 2011 Dec 29;115(51):15228-35. doi: 10.1021/jp209658y. Epub 2011 Dec 5.
Antimicrobial peptides (AMPs) are naturally occurring polymers that can kill bacteria by destabilizing their membranes. A quartz crystal microbalance with dissipation monitoring (QCM-D) was used to better understand the action of the AMP chrysophsin-3 on supported lipid bilayers (SLB) of phosphatidylcholine. Interaction of the SLB with chrysophsin-3 at 0.05 μM demonstrated changes in frequency (Δf) and energy dissipation (ΔD) that were near zero, indicating little change in the membrane. At higher concentrations of chyrsophsin-3 (0.25-4 μM), decreases in Δf of up to 7 Hz were measured. These negative frequency changes suggest that mass was being added to the SLB, possibly due to peptide insertion into the membrane. At a chrysophsin-3 concentration of 10 μM, there was a net mass loss, which was attributed to pore formation in the membrane. QCM-D can be used to describe a mechanistic relationship between AMP concentration and interaction with a model cell membrane.
抗菌肽 (AMPs) 是天然存在的聚合物,通过破坏细菌的膜来杀死细菌。石英晶体微天平耗散监测 (QCM-D) 用于更好地理解 AMP 海兔素-3 对磷脂酰胆碱支撑脂质双层 (SLB) 的作用。在 0.05 μM 的 SLB 与海兔素-3 的相互作用下,频率 (Δf) 和能量耗散 (ΔD) 的变化接近零,表明膜几乎没有变化。在较高浓度的海兔素-3(0.25-4 μM)下,测量到高达 7 Hz 的 Δf 负频率变化。这些负频率变化表明质量被添加到 SLB 中,可能是由于肽插入到膜中。在海兔素-3 浓度为 10 μM 时,出现净质量损失,这归因于膜中形成孔。QCM-D 可用于描述 AMP 浓度与模型细胞膜相互作用之间的机制关系。