Department of Bioengineering, University of Pennsylvania, 210 S 33rd Street, Philadelphia, PA 19104, USA.
Nanotechnology. 2011 Dec 9;22(49):494009. doi: 10.1088/0957-4484/22/49/494009. Epub 2011 Nov 21.
Stimuli-responsive materials are promising as smart materials for a range of applications. In this work, a photo-crosslinkable, thermoresponsive macromer was electrospun into fibrous scaffolds containing gold nanorods (AuNRs). The resulting fibrous nanocomposites composed of poly(N-isopropylacrylamide-co-polyethylene glycol acrylate) (PNPA) and PEGylated AuNRs were crosslinked and swollen in water. AuNRs strongly absorb in the near-infrared (NIR) region to generate heat, which triggered the fiber thermal transition upon NIR light exposure. During the thermal transition, scaffolds collapsed both macroscopically and microscopically, with individual fibers deswelling and pulling together. Exposure to a 1.1 W NIR laser decreased the diameter of swollen fibers by 34.7% from 1332 ± 193.3 to 868.9 ± 168.3 nm, and increased fiber density 116% from 209.5 ± 26.34 to 451.9 ± 23.68 fibers mm( - 1). This transition was dependent on the incorporation of the AuNRs, and was utilized to trigger the release of encapsulated proteins from the nanocomposite fiber mats. The expulsion of water from fibers upon NIR exposure caused the release rate of incorporated protein to increase greater than tenfold, from 0.038 ± 0.052 without external stimulus to 0.462 ± 0.227 µg protein/mg polymer/min with NIR exposure. These results suggest that light-responsive fibrous nanocomposites can be utilized in applications such as drug delivery.
刺激响应材料作为智能材料在许多应用中具有广阔的前景。在这项工作中,将光交联、温敏性大分子单体电纺成含有金纳米棒(AuNRs)的纤维支架。所得的由聚(N-异丙基丙烯酰胺-co-聚乙二醇丙烯酸酯)(PNPA)和 PEG 化 AuNRs 组成的纤维纳米复合材料在水中交联和溶胀。AuNRs 在近红外(NIR)区域强烈吸收,产生热量,在近红外光照射下触发纤维热转变。在热转变过程中,支架宏观和微观上都发生了坍塌,纤维去溶胀并聚集在一起。暴露在 1.1 W 的近红外激光下,使溶胀纤维的直径从 1332 ± 193.3nm 减小到 868.9 ± 168.3nm,减小了 34.7%,纤维密度增加了 116%,从 209.5 ± 26.34 根纤维/mm -1增加到 451.9 ± 23.68 根纤维/mm -1。这种转变依赖于 AuNRs 的掺入,并用于触发纳米复合纤维垫中包封蛋白的释放。NIR 暴露时纤维中水分的排出导致包埋蛋白的释放速率增加了十倍以上,从没有外部刺激时的 0.038 ± 0.052µg 蛋白/mg 聚合物/min 增加到 NIR 暴露时的 0.462 ± 0.227µg 蛋白/mg 聚合物/min。这些结果表明,光响应纤维纳米复合材料可用于药物输送等应用。