Suppr超能文献

二维数字乳腺摄影和断层合成中的三维微钙化簇模拟。

The simulation of 3D microcalcification clusters in 2D digital mammography and breast tomosynthesis.

机构信息

Department of Radiology, University Hospitals Leuven, Herestraat 49, 3000 Leuven, Belgium.

出版信息

Med Phys. 2011 Dec;38(12):6659-71. doi: 10.1118/1.3662868.

Abstract

PURPOSE

This work proposes a new method of building 3D models of microcalcification clusters and describes the validation of their realistic appearance when simulated into 2D digital mammograms and into breast tomosynthesis images.

METHODS

A micro-CT unit was used to scan 23 breast biopsy specimens of microcalcification clusters with malignant and benign characteristics and their 3D reconstructed datasets were segmented to obtain 3D models of microcalcification clusters. These models were then adjusted for the x-ray spectrum used and for the system resolution and simulated into 2D projection images to obtain mammograms after image processing and into tomographic sequences of projection images, which were then reconstructed to form 3D tomosynthesis datasets. Six radiologists were asked to distinguish between 40 real and 40 simulated clusters of microcalcifications in two separate studies on 2D mammography and tomosynthesis datasets. Receiver operating characteristic (ROC) analysis was used to test the ability of each observer to distinguish between simulated and real microcalcification clusters. The kappa statistic was applied to assess how often the individual simulated and real microcalcification clusters had received similar scores ("agreement") on their realistic appearance in both modalities. This analysis was performed for all readers and for the real and the simulated group of microcalcification clusters separately. "Poor" agreement would reflect radiologists' confusion between simulated and real clusters, i.e., lesions not systematically evaluated in both modalities as either simulated or real, and would therefore be interpreted as a success of the present models.

RESULTS

The area under the ROC curve, averaged over the observers, was 0.55 (95% confidence interval [0.44, 0.66]) for the 2D study, and 0.46 (95% confidence interval [0.29, 0.64]) for the tomosynthesis study, indicating no statistically significant difference between real and simulated lesions (p > 0.05). Agreement between allocated lesion scores for 2D mammography and those for the tomosynthesis series was poor.

CONCLUSIONS

The realistic appearance of the 3D models of microcalcification clusters, whether malignant or benign clusters, was confirmed for 2D digital mammography images and the breast tomosynthesis datasets; this database of clusters is suitable for use in future observer performance studies related to the detectability of microcalcification clusters. Such studies include comparing 2D digital mammography to breast tomosynthesis and comparing different reconstruction algorithms.

摘要

目的

本研究提出了一种构建微钙化簇三维模型的新方法,并描述了将其逼真地模拟到二维数字乳腺 X 线摄影和乳腺断层合成图像中的验证结果。

方法

使用微 CT 对 23 个具有恶性和良性特征的微钙化簇的乳腺活检标本进行扫描,对其三维重建数据集进行分割,获得微钙化簇的三维模型。然后根据所用 X 射线光谱和系统分辨率对这些模型进行调整,并将其模拟成二维投影图像,以获得经过图像处理的乳腺 X 线照片和投影图像的断层合成序列,然后对这些序列进行重建,以形成三维断层合成数据集。在对二维数字乳腺 X 线摄影和断层合成数据集的两项独立研究中,有 6 名放射科医生被要求区分 40 个真实和 40 个模拟的微钙化簇。使用受试者工作特征(ROC)分析来测试每个观察者区分模拟和真实微钙化簇的能力。应用卡帕统计来评估在两种模态中,每个模拟和真实的微钙化簇在逼真外观上获得相似评分的频率(“一致性”)。对所有读者以及真实和模拟的微钙化簇组分别进行了这种分析。“较差”的一致性反映了放射科医生在模拟和真实簇之间的混淆,即病变在两种模态中都没有系统地评估为模拟或真实,因此可以将其解释为当前模型的成功。

结果

观察者平均的 ROC 曲线下面积,二维研究为 0.55(95%置信区间 [0.44,0.66]),断层合成研究为 0.46(95%置信区间 [0.29,0.64]),表明真实病变和模拟病变之间没有统计学上的显著差异(p>0.05)。二维数字乳腺 X 线摄影和断层合成系列的分配病变评分之间的一致性较差。

结论

无论是恶性还是良性的微钙化簇,其三维模型的逼真外观都得到了二维数字乳腺 X 线摄影图像和乳腺断层合成数据集的确认;该微钙化簇数据库适合用于未来与微钙化簇检测能力相关的观察者性能研究。这些研究包括将二维数字乳腺 X 线摄影与乳腺断层合成进行比较,以及比较不同的重建算法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验