Suppr超能文献

在全髋关节置换中,关节囊压力和植入物运动是否相互作用导致假体周围骨内高压?

Do capsular pressure and implant motion interact to cause high pressure in the periprosthetic bone in total hip replacement?

作者信息

Alidousti Hamidreza, Taylor Mark, Bressloff Neil W

机构信息

School of Engineering Sciences, University of Southampton, Highfield, Southampton, UK.

出版信息

J Biomech Eng. 2011 Dec;133(12):121001. doi: 10.1115/1.4005455.

Abstract

When there is a debonding at the bone-implant interface, the difference in stiffness between the implant and the bone can result in micromotion, allowing existing gaps to open further or new gaps to be created during physiological loading. It has been suggested that periprosthetic fluid flow and high pressure may play an important role in osteolysis development in the proximity of these gaps. To explain this phenomenon, the concepts of "effective joint space" and "pumping stem" have been cited in many studies. However, there is no clear understanding of the factors causing, or contributing to, these mechanisms. It is likely that capsular pressure, gap dimensions, and micromotion of the gap during cyclic loading of an implant can play a defining role in inducing periprosthetic flow. In order to obtain a better understanding of the main influences on periprosthetic flows and the development of osteolysis, steady state and transient 2D computational fluid dynamic simulations were performed for the joint capsule of the lateral side of a stem-femur system, and a gap in communication with the capsule and the surrounding bone. It was shown that high capsular pressure may be the main driving force for high fluid pressure and flow in the bone surrounding the gap, while micromotion of only very long and narrow gaps can cause significant pressure and flow in the bone. At low capsular pressure, micromotion induced large flows in the gap region; however, the flow in the bone tissue was almost unaffected. The results also revealed the existence of high velocity spikes in the bone region at the bottom of the gap. These velocity spikes can exert excessive fluid shear stress on the bone cells and disturb the local biological balance of the surrounding interstitial fluid which can result in osteolysis development. High capsular pressure was observed to be the main cause of these velocity spikes whereas, at low capsular pressure, gap micromotion of only very long and narrow gaps generated significant velocity spikes in the bone at the bottom of the gaps.

摘要

当骨-植入物界面出现脱粘时,植入物与骨之间的刚度差异会导致微动,使现有间隙进一步扩大或在生理负荷期间产生新的间隙。有人提出,假体周围的液体流动和高压可能在这些间隙附近的骨溶解发展中起重要作用。为了解释这一现象,许多研究引用了“有效关节间隙”和“泵柄”的概念。然而,对于导致或促成这些机制的因素尚无明确认识。植入物循环加载过程中的囊内压力、间隙尺寸和间隙微动可能在诱导假体周围流动方面起决定性作用。为了更好地理解对假体周围流动和骨溶解发展的主要影响,对股骨柄系统外侧的关节囊以及与关节囊和周围骨相通的间隙进行了稳态和瞬态二维计算流体动力学模拟。结果表明,高囊内压力可能是间隙周围骨中高流体压力和流动的主要驱动力,而只有非常长且窄的间隙的微动才会在骨中引起显著的压力和流动。在低囊内压力下,微动在间隙区域引起大量流动;然而,骨组织中的流动几乎未受影响。结果还揭示了间隙底部骨区域存在高速尖峰。这些速度尖峰可对骨细胞施加过大的流体剪切应力,并扰乱周围组织液的局部生物平衡,从而导致骨溶解的发展。观察到高囊内压力是这些速度尖峰的主要原因,而在低囊内压力下,只有非常长且窄的间隙的微动才会在间隙底部的骨中产生显著的速度尖峰。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验