Suppr超能文献

木质纤维素和海洋生物质热解的热重-质谱分析。

Thermogravimetric-mass spectrometric analysis of lignocellulosic and marine biomass pyrolysis.

机构信息

Department of Chemical Engineering, University of Castilla-La Mancha, Avda. Camilo José Cela, 12, 13071 Ciudad Real, Spain.

出版信息

Bioresour Technol. 2012 Apr;109:163-72. doi: 10.1016/j.biortech.2012.01.001. Epub 2012 Jan 14.

Abstract

The pyrolysis characteristics of three lignocellulosic biomasses (fir wood, eucalyptus and pine bark) and a marine biomass (Nannochloropsis gaditana microalgae) were investigated by thermogravimetric analysis coupled with mass spectrometry (TGA-MS). Thermal degradation of lignocellulosic biomass was divided into four zones, corresponding to the decomposition of their main components (cellulose, hemicellulose and lignin) and a first step associated to water removal. Differences in volatile matter and cellulose content of lignocellulosic species resulted in different degradation rates. Microalgae pyrolysis occurred in three stages due to the main components of them (proteins), which are greatly different from lignocellulosic biomass. Heating rate effect was also studied. The main gaseous products formed were CO(2), light hydrocarbons and H(2)O. H(2) was detected at high temperatures, being associated to secondary reactions (char self-gasification). Pyrolysis kinetics were studied using a multiple-step model. The proposed model successfully predicted the pyrolytic behaviour of these samples resulting to be statistically meaningful.

摘要

采用热重分析-质谱联用(TGA-MS)技术研究了 3 种木质纤维素生物质(冷杉木材、桉树和松皮)和 1 种海洋生物质(栅藻)的热解特性。木质纤维素生物质的热降解分为四个区域,对应于其主要成分(纤维素、半纤维素和木质素)的分解和与水去除相关的第一步。木质纤维素物种的挥发分和纤维素含量的差异导致了不同的降解速率。由于它们的主要成分(蛋白质)不同,微藻的热解分为三个阶段,与木质纤维素生物质有很大的不同。还研究了升温速率的影响。形成的主要气态产物为 CO(2)、轻烃和 H(2)O。在高温下检测到 H(2),与二次反应(炭自气化)有关。采用多步模型研究了热解动力学。所提出的模型成功地预测了这些样品的热解行为,结果具有统计学意义。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验