Department of Prosthodontics, Narayana Dental College, Nellore, India.
J Prosthodont. 2012 Apr;21(3):181-4. doi: 10.1111/j.1532-849X.2011.00811.x. Epub 2012 Feb 19.
The purpose of this study was to compare the sagittal condylar angles set in the Hanau articulator by use of a method of obtaining an intraoral protrusive record to those angles found using a panoramic radiographic image.
Ten patients, free of signs and symptoms of temporomandibular disorder and with intact dentition were selected. The dental stone casts of the subjects were mounted on a Hanau articulator with a springbow and poly(vinyl siloxane) interocclusal records. For all patients, the protrusive records were obtained when the mandible moved forward by approximately 6 mm. All procedures for recording, mounting, and setting were done in the same session. The condylar guidance angles obtained were tabulated. A panoramic radiographic image of each patient was made with the Frankfurt horizontal plane parallel to the floor of the mouth. Tracings of the radiographic images were made. The horizontal reference line was marked by joining the orbitale and porion. The most superior and most inferior points of the curvatures were identified. These two lines were connected by a straight line representing the mean curvature line. Angles made by the intersection of the mean curvature line and the horizontal reference line were measured. The results were subjected to statistical analysis with a significance level of p < 0.05.
The radiographic values were on average 4° greater than the values obtained by protrusive interocclusal record method. The mean condylar guidance angle between the right and left side by both the methods was not statistically significant. The comparison of mean condylar guidance angles between the right side of the protrusive record method and the right side of the panoramic radiographic method and the left side of the protrusive record method and the left side of the panoramic radiographic method (p= 0.071 and p= 0.057, respectively) were not statistically significant.
Within the limitations of this study, it was concluded that the protrusive condylar guidance angles obtained by panoramic radiograph may be used in programming semi-adjustable articulators.
本研究旨在比较使用获得口腔内前伸记录的方法在 Hanau 合架上设定的矢状髁突角与使用全景放射影像获得的那些角度。
选择了 10 名无颞下颌关节紊乱症状且牙列完整的患者。将患者的石膏模型安装在带有弹簧弓和聚硅氧烷(polyvinyl siloxane,简称 PVS)咬合记录的 Hanau 合架上。对于所有患者,当下颌向前移动约 6 毫米时,获得前伸记录。所有记录、安装和设置程序均在同一次会话中进行。记录下获得的髁导角并列表。为每位患者制作一张平行于口腔底的法兰克福水平平面的全景放射影像。制作放射影像的描记图。通过连接眶点(orbitale)和顶骨点(porion)标记水平参考线。识别曲率的最上点和最下点。通过连接代表平均曲率线的这两条线来确定这些点。测量平均曲率线与水平参考线的交点形成的角度。使用统计学方法对结果进行分析,显著性水平设为 p < 0.05。
放射影像值平均比通过前伸咬合记录法获得的值大 4°。两种方法获得的左右侧髁导角平均值无统计学差异。前伸记录法右侧与全景放射法右侧、前伸记录法左侧与全景放射法左侧的平均髁导角比较(p=0.071 和 p=0.057)均无统计学差异。
在本研究的限制范围内,可以得出结论,使用全景放射片获得的前伸髁导角可以用于程控半可调合架的设定。