Cariology and Operative Dentistry, Department of Restorative Sciences, Tokyo Medical and Dental University, Yushima, Bunkyo-ku, Tokyo, Japan.
J Dent. 2012 May;40(5):387-96. doi: 10.1016/j.jdent.2012.01.017. Epub 2012 Feb 7.
To investigate optical properties of human enamel and dentine in relationship to structural orientation of enamel prisms and dentinal tubules by optical coherence tomography (OCT).
Discs of 300-400μm thickness including enamel with cross-cut or long-cut prisms and mid-coronal dentine with cross-cut, long-cut or oblique-cut tubules were obtained from 28 non-carious freshly extracted human third molars sectioned at different directions. Each disc was placed over a metal plate and B-scan images were obtained by a swept-source OCT at 1330nm centre wavelength (Dental SS-OCT Prototype 1, Panasonic Healthcare Co., Ltd, Japan). Refractive index (n) calculated from optical path length and real thickness, and OCT signal slope (OCTSS) in relation to structural orientation were statistically compared among groups (α=0.05). The discs were sectioned and observed under SEM to confirm prism or tubule orientations.
No significant differences were found in n and OCTSS among cross-cut and long-cut enamel groups (p>0.05). However, in dentine, there was a significant difference in both variables among different regions. In cross-cut tubule orientation, the average n and OCTSS values were significantly lower compared to other two groups (long-cut and oblique-cut) (p<0.05). There was a significant difference in both variables between enamel and dentine (p<0.05).
Unlike enamel, refractive index and OCT signal patterns in dentine vary according to structural orientation, with dentine tubules playing the role. Attenuation of OCT signal intensity was small in enamel. The findings may contribute to a better understanding of the interactions of light with the dental tissue.
Precise records of refractive indices and OCT signal patterns may be important for clinical diagnosis of caries and measurement of structural depth for operative purposes using this technology. Effects of dentine structural orientation on refractive index and scattering pattern must be considered when observing human teeth by OCT cross-sectional imaging.
通过光相干断层扫描(OCT)研究牙釉质和牙本质的光学特性与釉柱和牙本质小管结构取向的关系。
从 28 颗无龋新鲜第三磨牙中获取厚度为 300-400μm 的牙釉质圆盘,包括横切或长切棱镜的牙釉质和具有横切、长切或斜切小管的近中冠状牙本质。每个圆盘放置在金属板上,通过 1330nm 中心波长的扫频源 OCT(Dental SS-OCT Prototype 1,松下医疗保健有限公司,日本)获得 B 扫描图像。根据光程和实际厚度计算折射率(n),并比较各组之间的 OCT 信号斜率(OCTSS)与结构取向的关系(α=0.05)。将圆盘切片并用扫描电子显微镜观察,以确认棱镜或小管的取向。
在横切和长切牙釉质组之间,n 和 OCTSS 没有显著差异(p>0.05)。然而,在牙本质中,这两个变量在不同区域之间存在显著差异。在横切小管取向中,与其他两组(长切和斜切)相比,平均 n 和 OCTSS 值明显较低(p<0.05)。牙釉质和牙本质之间这两个变量均有显著差异(p<0.05)。
与牙釉质不同,牙本质的折射率和 OCT 信号模式根据结构取向而变化,牙本质小管起作用。牙釉质的 OCT 信号强度衰减较小。这些发现可能有助于更好地理解光与牙齿组织的相互作用。
精确记录折射率和 OCT 信号模式对于使用该技术进行临床龋齿诊断和手术结构深度测量可能很重要。在 OCT 横截面成像观察人牙时,必须考虑牙本质结构取向对折射率和散射模式的影响。