Suppr超能文献

1-戊基自由基分解的压力依赖性和分支比:激波管实验和主方程建模。

Pressure dependence and branching ratios in the decomposition of 1-pentyl radicals: shock tube experiments and master equation modeling.

机构信息

Chemical and Biochemical Reference Data, National Institute of Standards and Technology, Gaithersburg, Maryland, 20899-8320, USA.

出版信息

J Phys Chem A. 2012 Mar 22;116(11):2895-910. doi: 10.1021/jp2115302. Epub 2012 Mar 13.

Abstract

The decomposition and intramolecular H-transfer isomerization reactions of the 1-pentyl radical have been studied at temperatures of 880 to 1055 K and pressures of 80 to 680 kPa using the single pulse shock tube technique and additionally investigated with quantum chemical methods. The 1-pentyl radical was generated by shock heating dilute mixtures of 1-iodopentane and the stable products of its decomposition have been observed by postshock gas chromatographic analysis. Ethene and propene are the main olefin products and account for >97% of the carbon balance from 1-pentyl. Also produced are very small amounts of (E)-2-pentene, (Z)-2-pentene, and 1-butene. The ethene/propene product ratio is pressure dependent and varies from about 3 to 5 over the range of temperatures and pressures studied. Formation of ethene and propene can be related to the concentrations of 1-pentyl and 2-pentyl radicals in the system and the relative rates of five-center intramolecular H-transfer reactions and β C-C bond scissions. The 3-pentyl radical, formed via a four-center intramolecular H transfer, leads to 1-butene and plays only a very minor role in the system. The observed (E/Z)-2-pentenes can arise from a small amount of beta C-H bond scission in the 2-pentyl radical. The current experimental and computational results are considered in conjunction with relevant literature data from lower temperatures to develop a consistent kinetics model that reproduces the observed branching ratios and pressure effects. The present experimental results provide the first available data on the pressure dependence of the olefin product branching ratio for alkyl radical decomposition at high temperatures and require a value of <ΔE(down)(1000 K)> = (675 ± 100) cm(-1) for the average energy transferred in deactivating collisions in an argon bath gas when an exponential-down model is employed. High pressure rate expressions for the relevant H-transfer reactions and β bond scissions are derived and a Rice Ramsberger Kassel Marcus/Master Equation (RRKM/ME) analysis has been performed and used to extrapolate the data to temperatures between 700 and 1900 K and pressures of 10 to 1 × 10(5) kPa.

摘要

在 880 至 1055 K 的温度和 80 至 680 kPa 的压力下,使用单脉冲激波管技术研究了 1-戊基自由基的分解和分子内 H 转移异构化反应,并通过量子化学方法进行了进一步研究。1-戊基自由基通过激波加热 1-碘戊烷的稀混合物生成,并通过后激气相色谱分析观察其分解的稳定产物。乙烯和丙烯是主要的烯烃产物,占 1-戊基碳平衡的>97%。还生成了少量的(E)-2-戊烯、(Z)-2-戊烯和 1-丁烯。乙烯/丙烯产物比与温度和压力范围内的系统中 1-戊基和 2-戊基自由基的浓度以及五个中心分子内 H 转移反应和βC-C 键断裂的相对速率有关。通过四中心分子内 H 转移形成的 3-戊基自由基导致 1-丁烯,并且在系统中只起很小的作用。观察到的(E/Z)-2-戊烯可以来自 2-戊基自由基中少量的βC-H 键断裂。将当前的实验和计算结果与来自较低温度的相关文献数据结合起来,开发了一个一致的动力学模型,该模型再现了观察到的分支比和压力效应。目前的实验结果提供了高温下烷基自由基分解时烯烃产物分支比随压力变化的第一个可用数据,并且当采用指数下降模型时,当氩浴气体中激波管实验时,需要一个<ΔE(down)(1000 K)> = (675 ± 100) cm(-1)的值来表示在去活化碰撞中传递的平均能量。推导出了相关 H 转移反应和β键断裂的高压速率表达式,并进行了 Rice Ramsberger Kassel Marcus/主方程 (RRKM/ME) 分析,并将数据外推到 700 至 1900 K 的温度和 10 至 1×10(5) kPa 的压力。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验