Department of Biological Sciences, University of Notre Dame, Notre Dame, Indiana 46556, USA.
Ecol Appl. 2012 Jan;22(1):281-97. doi: 10.1890/11-0381.1.
Streams of the agricultural Midwest, USA, export large quantities of nitrogen, which impairs downstream water quality, most notably in the Gulf of Mexico. The two-stage ditch is a novel restoration practice, in which floodplains are constructed alongside channelized ditches. During high flows, water flows across the floodplains, increasing benthic surface area and stream water residence time, as well as the potential for nitrogen removal via denitrification. To determine two-stage ditch nitrogen removal efficacy, we measured denitrification rates in the channel and on the floodplains of a two-stage ditch in north-central Indiana for one year before and two years after restoration. We found that instream rates were similar before and after the restoration, and they were influenced by surface water NO3- concentration and sediment organic matter content. Denitrification rates were lower on the constructed floodplains and were predicted by soil exchangeable NO3- concentration. Using storm flow simulations, we found that two-stage ditch restoration contributed significantly to NO3- removal during storm events, but because of the high NO3- loads at our study site, < 10% of the NO3- load was removed under all storm flow scenarios. The highest percentage of NO3- removal occurred at the lowest loads; therefore, the two-stage ditch's effectiveness at reducing downstream N loading will be maximized when the practice is coupled with efforts to reduce N inputs from adjacent fields.
美国中西部农业地区的溪流大量输出氮,这损害了下游的水质,在墨西哥湾尤为明显。两级沟渠是一种新颖的恢复实践,在这种实践中,洪泛区沿着渠道化沟渠建造。在高流量期间,水会流过洪泛区,增加底栖表面积和溪流水停留时间,以及通过反硝化去除氮的潜力。为了确定两级沟渠的氮去除效果,我们在印第安纳州中北部的一个两级沟渠的渠道和洪泛区进行了一年的恢复前后的反硝化速率测量。我们发现,恢复前后的溪流速率相似,它们受到地表水 NO3-浓度和沉积物有机质含量的影响。在建造的洪泛区上的反硝化速率较低,并且可以通过土壤可交换 NO3-浓度进行预测。使用暴雨流模拟,我们发现两级沟渠恢复在暴雨事件中对 NO3-去除有显著贡献,但由于我们研究地点的高 NO3-负荷,在所有暴雨流情景下,去除的 NO3-负荷不到 10%。在最低负荷下,NO3-去除的百分比最高;因此,当该实践与减少来自相邻田地的氮输入的努力相结合时,两级沟渠在减少下游氮负荷方面的有效性将最大化。