School of Applied Sciences and Health Innovations Research Institute, RMIT University, Melbourne, Australia.
Med Phys. 2012 Apr;39(4):2203-13. doi: 10.1118/1.3694107.
Interfraction and intrafraction variation in anatomic structures is a significant challenge in contemporary radiotherapy. The objective of this work is to develop a novel tool for deformable structure dosimetry, using a tissue-equivalent deformable gel dosimeter that can reproducibly simulate targets subject to deformation. This will enable direct measurement of integrated doses delivered in different deformation states, and the verification of dose deforming algorithms.
A modified version of the nPAG polymer gel has been used as a deformable 3D dosimeter and phantom to investigate doses delivered to deforming tissue-equivalent geometry. The deformable gel (DEFGEL) dosimeter/phantom is comprised of polymer gel in a latex membrane, moulded (in this case) into a cylindrical geometry, and deformed with an acrylic compressor. Fifteen aluminium fiducial markers (FM) were implanted into DEFGEL phantoms and the reproducibility of deformation was determined via multiple computed tomography (CT) scans in deformed and nondeformed states before and after multiple (up to 150) deformations. Dose was delivered to the DEFGEL phantom in three arrangements: (i) without deformation, (ii) with deformation, and (iii) cumulative exposures with and without deformation, i.e., dose integration. Irradiations included both square field and a stereotactic multiple dynamic arc treatment adapted from a patient plan. Doses delivered to the DEFGEL phantom were read out using cone beam optical CT.
Reproducibility was verified by observation of interscan shifts of FM locations (as determined via CT), measured from an absolute reference point and in terms of inter-FM distance. The majority (76%) of points exhibited zero shift, with others shifting by one pixel size consistent with setup error as confirmed with a control sample. Comparison of dose profiles and 2D isodose distributions from the three arrangements illustrated complex spatial redistribution of dose in all three dimensions occurring as a result of the change in shape of the target between irradiations, even for a relatively simple deformation. Discrepancies of up to 30% of the maximum dose were evident from dose difference maps for three orthogonal planes taken through the isocenter of a stereotactic field.
This paper describes the first use of a tissue-equivalent, 3D dose-integrating deformable phantom that yields integrated or redistributed dosimetric information. The proposed methodology readily yields three-dimensional (3D) dosimetric data from radiation delivery to the DEFGEL phantom in deformed and undeformed states. The impacts of deformation on dose distributions were readily seen in the isodose contours and line profiles from the three arrangements. It is demonstrated that the system is potentially capable of reproducibly emulating the physical deformation of an organ, and therefore can be used to evaluate absorbed doses to deformable targets and organs at risk in three dimensions and to validate deformation algorithms applied to dose distributions.
在当代放射治疗中,解剖结构的分次内和分次间变化是一个重大挑战。本研究的目的是开发一种新的用于变形结构剂量测定的工具,使用可重复模拟受变形影响的靶区的组织等效可变形凝胶剂量计。这将能够直接测量在不同变形状态下输送的积分剂量,并验证剂量变形算法。
对 nPAG 聚合物凝胶进行了修改,用作变形 3D 剂量计和体模,以研究输送到变形组织等效几何形状的剂量。可变形凝胶(DEFGEL)剂量计/体模由乳胶膜中的聚合物凝胶组成,模制(在这种情况下)成圆柱形,并使用丙烯酸压缩机变形。在变形和非变形状态下,在多次(多达 150 次)变形之前和之后,通过多次计算机断层扫描(CT)扫描,确定十五个铝基准标记(FM)在 DEFGEL 体模中的重现性。在三种布置下将剂量输送到 DEFGEL 体模:(i)无变形,(ii)有变形,和(iii)有和无变形的累积暴露,即剂量积分。照射包括方形场和立体定向多个动态弧形治疗,均改编自患者计划。使用锥形束光学 CT 读取输送到 DEFGEL 体模的剂量。
通过观察从绝对参考点测量的 FM 位置(通过 CT 确定)的扫描间移位以及 FM 之间的距离,验证了可重复性。大多数(76%)点表现出零移位,而其他点的移位与设置误差一致,这与对照样本一致。从三种布置的剂量分布和二维等剂量分布的比较可以看出,即使对于相对简单的变形,在两次照射之间靶区形状的变化也导致了所有三个维度的剂量的复杂空间再分配。通过穿过立体定向场等中心点的三个正交平面的剂量差图,最大剂量的差异高达 30%。
本文首次使用组织等效的 3D 剂量积分可变形体模,该体模可提供积分或再分布的剂量学信息。所提出的方法可以从 DEFGEL 体模在变形和未变形状态下的辐射输送中快速获得三维(3D)剂量学数据。从三种布置的等剂量轮廓和线图中可以很容易地看出变形对剂量分布的影响。结果表明,该系统具有可重复性地模拟器官物理变形的潜力,因此可用于评估三维可变形靶区和危及器官的吸收剂量,并验证应用于剂量分布的变形算法。