State Key Laboratory for Advanced Metals and Materials, School of Materials Science & Engineering, University of Science & Technology Beijing, Beijing 100083, PR China.
Nanoscale. 2012 Jun 7;4(11):3438-43. doi: 10.1039/c2nr30334e. Epub 2012 Apr 27.
An amperometric biosensor based on zinc oxide (ZnO) nanotetrapods was designed to detect L-lactic acid. The lactate oxidase was immobilized on the surface of ZnO nanotetrapods by electrostatic adsorption. Unlike traditional detectors, the special four-leg individual ZnO nanostructure, as an adsorption layer, provides multiterminal charge transfer channels. Furthermore, a large amount of ZnO tetrapods are randomly stacked to form a three-dimensional network naturally that facilitates the exchange of electrons and ions in the phosphate buffer solution. Utilizing amperometric response measurements, the prepared ZnO nanotetrapod L-lactic acid biosensor displayed a detection limit of 1.2 μM, a low apparent Michaelis-Menten constant of 0.58 mM, a high sensitivity of 28.0 μA cm(-2) mM(-1) and a good linear relationship in the range of 3.6 μM-0.6 mM for the L-lactic acid detection. This study shows that the biosensor based on ZnO tetrapod nanostructures is highly sensitive and able to respond rapidly in detecting lactic acid.
基于氧化锌(ZnO)四脚纳米塔的安培生物传感器被设计用来检测 L-乳酸。乳酸氧化酶通过静电吸附固定在 ZnO 四脚纳米塔的表面。与传统的探测器不同,特殊的四脚 ZnO 纳米结构作为吸附层,提供了多终端电荷转移通道。此外,大量的 ZnO 四脚纳米塔随机堆积,自然形成三维网络,有利于磷酸缓冲溶液中电子和离子的交换。利用安培响应测量,所制备的 ZnO 四脚纳米塔 L-乳酸生物传感器的检测限为 1.2 μM,低表观米氏常数为 0.58 mM,高灵敏度为 28.0 μA cm(-2) mM(-1),在 3.6 μM-0.6 mM 的 L-乳酸检测范围内具有良好的线性关系。这项研究表明,基于 ZnO 四脚纳米结构的生物传感器在检测乳酸时具有高灵敏度和快速响应能力。