School of Life Sciences, Institute of Bioengineering and Laboratory of Stem Cell Bioengineering, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.
Lab Chip. 2012 Jul 7;12(13):2313-6. doi: 10.1039/c2lc40130d. Epub 2012 May 8.
Microfluidic technology has been successfully applied to isolate very rare tumor-derived epithelial cells (circulating tumor cells, CTCs) from blood with relatively high yield and purity, opening up exciting prospects for early detection of cancer. However, a major limitation of state-of-the-art CTC-chips is their inability to characterize the behavior and function of captured CTCs, for example to obtain information on proliferative and invasive properties or, ultimately, tumor re-initiating potential. Although CTCs can be efficiently immunostained with markers reporting phenotype or fate (e.g. apoptosis, proliferation), it has not yet been possible to reliably grow captured CTCs over long periods of time and at single cell level. It is challenging to remove CTCs from a microchip after capture, therefore such analyses should ideally be performed directly on-chip. To address this challenge, we merged CTC capture with three-dimensional (3D) tumor cell culture on the same microfluidic platform. PC3 prostate cancer cells were isolated from spiked blood on a transparent PDMS CTC-chip, encapsulated on-chip in a biomimetic hydrogel matrix (QGel™) that was formed in situ, and their clonal 3D spheroid growth potential was assessed by microscopy over one week in culture. The possibility to clonally expand a subset of captured CTCs in a near-physiological in vitro model adds an important element to the expanding CTC-chip toolbox that ultimately should improve prediction of treatment responses and disease progression.
微流控技术已成功应用于从血液中以相对较高的产量和纯度分离非常罕见的肿瘤衍生上皮细胞(循环肿瘤细胞,CTC),为癌症的早期检测开辟了令人兴奋的前景。然而,最先进的 CTC 芯片的一个主要限制是它们无法表征捕获的 CTC 的行为和功能,例如获取增殖和侵袭特性的信息,或者最终获取肿瘤起始潜能的信息。虽然可以使用报告表型或命运的标志物(例如凋亡、增殖)有效地对 CTC 进行免疫染色,但迄今为止,还不可能在长时间内并在单细胞水平上可靠地培养捕获的 CTC。从微芯片中去除 CTC 具有挑战性,因此此类分析理想情况下应直接在芯片上进行。为了解决这一挑战,我们将 CTC 捕获与相同微流控平台上的三维(3D)肿瘤细胞培养相结合。在透明 PDMS CTC 芯片上从掺入的血液中分离出 PC3 前列腺癌细胞,在原位形成的仿生水凝胶基质(QGel™)中在芯片上封装,并通过在培养过程中一周内的显微镜评估其克隆 3D 球体生长潜力。在接近生理的体外模型中对捕获的 CTC 亚群进行克隆扩增的可能性为不断扩展的 CTC 芯片工具包增加了一个重要元素,最终应改善对治疗反应和疾病进展的预测。