Suppr超能文献

天然气传输管道焊工接触含锰焊接烟尘与肺功能指标。

Occupational exposure to manganese-containing welding fumes and pulmonary function indices among natural gas transmission pipeline welders.

机构信息

Department of Occupational Health Engineering, School of Public Health, Tehran University of Medical Sciences, Iran.

出版信息

J Occup Health. 2012;54(4):316-22. doi: 10.1539/joh.11-0269-fs. Epub 2012 May 18.

Abstract

OBJECTIVES

The objectives of this study were to evaluate manganese (Mn)-containing welding fumes' exposure, assess urinary Mn as a biomarker for Mn exposure and investigate the correlation of Mn in air, total fumes and urinary Mn with pulmonary function indices in 118 welders and 37 unexposed controls from two regions in Iran, Assaluyeh and Borujen.

METHODS

Air samples were collected on mixed cellulose ester membrane filters in personal air samplers and then analyzed using inductively coupled plasma atomic emission spectroscopy (ICP-AES) (NIOSH Method 7300). For all participants, urine samples were collected during the entire work shift, and Mn in urine was determined by graphite furnace atomic absorption spectroscopy according to NIOSH Method 8310. Spirometric measurements were also done for participants.

RESULTS

The maximum exposures to airborne Mn and total fumes were 0.304 ± 0.256 mg/m(3) and 21.52 ± 9.40 mg/m(3), respectively. The urine Mn levels in the various groups ranged between 0.77 to 7.58 μg/l. The correlation between airborne Mn and urinary Mn was significant for total whole participants. Some values of spirometric indices were statistically lower in welders rather than controls.

CONCLUSIONS

Our results indicate that many welders have been exposed to higher concentrations of Mn-containing welding fumes. Urinary Mn can be used as a biomarker for Mn exposure. There were weak inverse correlations between Mn-containing welding fumes and pulmonary function indices, and the inverse correlation between urinary Mn with forced vital capacities (FVC) and forced expiratory volume in 1 s (FEV1) was significant.

摘要

目的

本研究旨在评估含锰焊接烟尘的暴露情况,评估尿锰作为锰暴露的生物标志物,并研究伊朗 Assaluyeh 和 Borujen 两个地区的 118 名焊工和 37 名未暴露对照者的空气中锰、总烟尘和尿锰与肺功能指标的相关性。

方法

使用个人空气采样器在混合纤维素酯膜滤器上采集空气样本,然后使用电感耦合等离子体原子发射光谱法(ICP-AES)(NIOSH 方法 7300)进行分析。对于所有参与者,在整个工作班次期间采集尿样,并根据 NIOSH 方法 8310 使用石墨炉原子吸收光谱法测定尿锰。还对参与者进行了肺功能测量。

结果

空气中锰和总烟尘的最大暴露量分别为 0.304 ± 0.256 mg/m(3) 和 21.52 ± 9.40 mg/m(3)。各组尿锰水平在 0.77 至 7.58 μg/l 之间。总人群中,空气中的锰与尿锰之间存在显著相关性。与对照组相比,一些肺功能指标的数值在焊工中较低。

结论

我们的结果表明,许多焊工接触到了更高浓度的含锰焊接烟尘。尿锰可用作锰暴露的生物标志物。含锰焊接烟尘与肺功能指标之间存在弱的负相关,尿锰与用力肺活量(FVC)和 1 秒用力呼气量(FEV1)之间存在显著的负相关。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验