Department of Organismic and Evolutionary Biology, Harvard University Cambridge, MA, USA.
Front Plant Sci. 2012 Jun 6;3:107. doi: 10.3389/fpls.2012.00107. eCollection 2012.
Bubble formation in the conduits of woody plants sets a challenge for uninterrupted water transportation from the soil up to the canopy. Freezing and thawing of stems has been shown to increase the number of air-filled (embolized) conduits, especially in trees with large conduit diameters. Despite numerous experimental studies, the mechanisms leading to bubble formation during freezing have not been addressed theoretically. We used classical nucleation theory and fluid mechanics to show which mechanisms are most likely to be responsible for bubble formation during freezing and what parameters determine the likelihood of the process. Our results confirm the common assumption that bubble formation during freezing is most likely due to gas segregation by ice. If xylem conduit walls are not permeable to the salts expelled by ice during the freezing process, osmotic pressures high enough for air seeding could be created. The build-up rate of segregated solutes in front of the ice-water interface depends equally on conduit diameter and freezing velocity. Therefore, bubble formation probability depends on these variables. The dependence of bubble formation probability on freezing velocity means that the experimental results obtained for cavitation threshold conduit diameters during freeze/thaw cycles depend on the experimental setup; namely sample size and cooling rate. The velocity dependence also suggests that to avoid bubble formation during freezing trees should have narrow conduits where freezing is likely to be fast (e.g., branches or outermost layer of the xylem). Avoidance of bubble formation during freezing could thus be one piece of the explanation why xylem conduit size of temperate and boreal zone trees varies quite systematically.
木质植物导管中的气泡形成对从土壤到树冠的不间断水分运输提出了挑战。已经表明,茎的冻结和融冻会增加充满空气的(栓塞的)导管数量,特别是在导管直径较大的树木中。尽管进行了大量的实验研究,但导致冻结过程中形成气泡的机制尚未从理论上得到解决。我们使用经典成核理论和流体力学来表明哪些机制最有可能导致冻结过程中形成气泡,以及哪些参数决定了该过程发生的可能性。我们的结果证实了一个常见的假设,即在冻结过程中形成气泡最有可能是由于气体通过冰进行分离。如果木质部导管壁对冰在冻结过程中排出的盐不可渗透,那么就可以产生足以进行空气播种的渗透压。在冰-水界面前方分离出的溶质的积聚速率同样取决于导管直径和冻结速度。因此,气泡形成的概率取决于这些变量。气泡形成概率对冻结速度的依赖性意味着,在冻融循环期间为空洞化阈值导管直径获得的实验结果取决于实验设置;即样品尺寸和冷却速度。这种速度依赖性还表明,为了避免在冻结过程中形成气泡,树木应该具有狭窄的导管,这些导管很可能会快速冻结(例如,树枝或木质部的最外层)。因此,避免在冻结过程中形成气泡可能是解释温带和北方地区树木木质部导管大小相当系统地变化的原因之一。