Group of Complex Fluids, Applied Physics Department, University of Almeria, Almeria ES-04120, Spain.
J Chem Phys. 2012 Jun 7;136(21):214903. doi: 10.1063/1.4723686.
We present investigations of the structural properties of thermoresponsive poly(N-isopropylacrylamide) (PNiPAM) microgels dispersed in an aqueous solvent. In this particular work poly(ethyleneglycol) (PEG) units flanked with acrylate groups are employed as cross-linkers, providing an architecture designed to resist protein fouling. Dynamic light scattering (DLS), static light scattering (SLS), and small angle neutron scattering (SANS) are employed to study the microgels as a function of temperature over the range 10 °C ≤ T ≤ 40 °C. DLS and SLS measurements are simultaneously performed and, respectively, allow determination of the particle hydrodynamic radius, R(h), and radius of gyration, R(g), at each temperature. The thermal variation of these magnitudes reveals the microgel deswelling at the PNiPAM lower critical solution temperature (LCST). However, the hydrodynamic radius displays a second transition to larger radii at temperatures T ≤ 20 °C. This feature is atypical in standard PNiPAM microgels and suggests a structural reconfiguration within the polymer network at those temperatures. To better understand this behavior we perform neutron scattering measurements at different temperatures. In striking contrast to the scattering profile of soft sphere microgels, the SANS profiles for T ≤ LCST of our PNiPAM-PEG suspensions indicate that the particles exhibit structural properties characteristic of star polymer configurations. The star polymer radius of gyration and correlation length gradually decrease with increasing temperature despite maintenance of the star polymer configuration. At temperatures above the LCST, the scattered SANS intensity is typical of soft sphere systems.
我们研究了温敏性聚(N-异丙基丙烯酰胺)(PNiPAM)微凝胶在水溶剂中的结构特性。在这项工作中,采用带有丙烯酰胺基团的聚乙二醇(PEG)单元作为交联剂,提供了一种设计用于抵抗蛋白质污染的结构。动态光散射(DLS)、静态光散射(SLS)和小角中子散射(SANS)被用来研究微凝胶在 10°C≤T≤40°C 的温度范围内的性质。DLS 和 SLS 测量同时进行,分别可以确定每个温度下的颗粒水动力半径 R(h)和回转半径 R(g)。这些量的热变化揭示了 PNiPAM 低临界溶液温度(LCST)下微凝胶的溶胀。然而,水动力半径在温度 T≤20°C 时显示出向更大半径的第二次转变。这种特征在标准 PNiPAM 微凝胶中是不典型的,表明在这些温度下聚合物网络内发生了结构重构。为了更好地理解这种行为,我们在不同温度下进行了中子散射测量。与软球微凝胶的散射谱形成鲜明对比的是,我们的 PNiPAM-PEG 悬浮液在 T≤LCST 时的 SANS 谱表明,颗粒表现出星型聚合物构型的结构特性。尽管保持了星型聚合物的构型,但星型聚合物的回转半径和相关长度逐渐随温度升高而降低。在 LCST 以上的温度下,散射的 SANS 强度是典型的软球体系。