Ravindran Sooraj, Datta Arnab, Alameh Kamal, Lee Yong Tak
School of Information and Communications, Gwangju Institute of Science and Technology (GIST), 1, Oryong-dong, Buk-gu, Gwangju, 500-712, South Korea.
Opt Express. 2012 Jul 2;20(14):15610-27. doi: 10.1364/OE.20.015610.
We propose and analyse a GaAs-based optical switch having a ring resonator configuration which can switch optical telecommunication signals over the 1300 nm and 1500 nm bands, using bias assisted carrier injection as the switching mechanism. The switching is achieved through variation in the refractive index of the ring resonator produced by changing the injected carrier density through the application of bias voltage. Detail analysis of the switching characteristics reveals that the amount of switching depends on the refractive index change, which indeed is a strong function of injected carrier density and applied bias voltage. An isolation of 25 dB can be achieved during the ON state, while more than 40 dB isolation is realised during the OFF state. More importantly, our analysis shows that the proposed GaAs-based switch can operate over the 1300 nm and 1500 nm optical telecommunication bands, that are much farther from the bandgap of the GaAs material, without the need for "conventional" Indium based ternary and quaternary semiconductor materials. It therefore extends the usable wavelength of GaAs based optoelectronic devices. Furthermore, we have presented detail calculations to quantify power-delay metric of the proposed device. The proposed optical switch maintains a smaller footprint as when compared to Mach-Zehnder Interferometer or Directional Coupler based switches therefore, making it suitable for large scale integration and implementing next generation optical interconnects, optical communication and computing.
我们提出并分析了一种基于砷化镓的光开关,该光开关具有环形谐振器结构,能够利用偏置辅助载流子注入作为开关机制,在1300纳米和1500纳米波段上切换光通信信号。通过施加偏置电压来改变注入的载流子密度,从而改变环形谐振器的折射率,实现开关功能。对开关特性的详细分析表明,开关量取决于折射率的变化,而折射率的变化实际上是注入载流子密度和施加偏置电压的强函数。在导通状态下可实现25分贝的隔离度,而在截止状态下可实现超过40分贝的隔离度。更重要的是,我们的分析表明,所提出的基于砷化镓的开关能够在1300纳米和1500纳米光通信波段上工作,这些波段与砷化镓材料的带隙相距甚远,无需使用“传统的”基于铟的三元和四元半导体材料。因此,它扩展了基于砷化镓的光电器件的可用波长。此外,我们还进行了详细计算,以量化所提出器件的功率延迟指标。与基于马赫-曾德尔干涉仪或定向耦合器的开关相比,所提出的光开关占用的空间更小,因此适合大规模集成以及实现下一代光互连、光通信和计算。