Department of Chemistry, Stony Brook University, Stony Brook, NY 11794, USA.
Phys Chem Chem Phys. 2012 Oct 21;14(39):13630-7. doi: 10.1039/c2cp42628e.
In this work, we report on product energy distributions for methyl radicals produced by UV photooxidation of a set of structurally related carbonyl molecules, R(CO)CH(3) (R = H, CH(3), C(2)H(5), C(6)H(5)), adsorbed on a TiO(2)(110) surface. Specifically, laser pump-probe techniques were used to measure the translational energy distributions of methyl radicals resulting from α-carbon bond cleavage induced by photoexcited charge carriers at the TiO(2) surface. Photoreaction requires the presence of co-adsorbed oxygen and/or background oxygen during UV laser (pump) exposure, which is consistent with the formation of a photoactive oxygen complex, i.e., η(2)-bonded diolate species (R(COO)CH(3)). The methyl translational energy distributions were found to be bimodal for all molecules studied, with "slow" and "fast" dissociation channels. The "fast" methyl channel is attributed to prompt fragmentation of the diolate species following charge transfer at the TiO(2) surface. The average translational energies of the "fast" methyl channels are found to vary with R-substituent and correlate with the mass of the remaining surface fragments, RCO(x) (x =1 or 2). By comparison, the average energies of the "slow" methyl channels do not show any obvious correlation with R-substituent. The apparent correlation of the "fast" methyl translation energies with surface fragment mass is consistent with a simple two-body fragmentation event isolated on the diolate molecule with little coupling to the surface. These results also suggest that the total available energy for methyl fragmentation does not vary significantly with changes in R-substituent and is representative of exit barriers leading to "fast" methyl fragments.
在这项工作中,我们报告了一组结构相关的羰基分子,R(CO)CH(3)(R = H,CH(3),C(2)H(5),C(6)H(5)),在 TiO(2)(110)表面吸附时,通过 UV 光氧化产生的甲基自由基的产物能量分布。具体来说,我们使用激光泵浦探测技术测量了由 TiO(2)表面光激发载流子诱导的α-碳键断裂产生的甲基自由基的平移能分布。光反应需要在 UV 激光(泵浦)暴露期间存在共吸附的氧和/或背景氧,这与形成光活性氧络合物,即η(2)-键合二醇化物(R(COO)CH(3))一致。研究发现,所有研究的分子的甲基平移能分布都是双峰的,有“慢”和“快”两种解离通道。“快”甲基通道归因于在 TiO(2)表面发生电荷转移后,二醇化物物种的迅速断裂。“快”甲基通道的平均平移能随 R-取代基而变化,并与剩余表面碎片 RCO(x)(x =1 或 2)的质量相关。相比之下,“慢”甲基通道的平均能量与 R-取代基没有明显的相关性。“快”甲基平移能与表面碎片质量的明显相关性与二醇化物分子上的简单二体断裂事件一致,与表面的耦合很小。这些结果还表明,甲基断裂的总可用能量与 R-取代基的变化没有显著变化,代表导致“快”甲基碎片的出口势垒。