Department of Physics, University of Alberta, Edmonton, AB, Canada T6G 2E1.
Proc Natl Acad Sci U S A. 2012 Oct 2;109(40):16167-72. doi: 10.1073/pnas.1204114109. Epub 2012 Sep 17.
Programmed -1 frameshifting, whereby the reading frame of a ribosome on messenger RNA is shifted in order to generate an alternate gene product, is often triggered by a pseudoknot structure in the mRNA in combination with an upstream slippery sequence. The efficiency of frameshifting varies widely for different sites, but the factors that determine frameshifting efficiency are not yet fully understood. Previous work has suggested that frameshifting efficiency is related to the resistance of the pseudoknot against mechanical unfolding. We tested this hypothesis by studying the mechanical properties of a panel of pseudoknots with frameshifting efficiencies ranging from 2% to 30%: four pseudoknots from retroviruses, two from luteoviruses, one from a coronavirus, and a nonframeshifting bacteriophage pseudoknot. Using optical tweezers to apply tension across the RNA, we measured the distribution of forces required to unfold each pseudoknot. We found that neither the average unfolding force, nor the unfolding kinetics, nor the parameters describing the energy landscape for mechanical unfolding of the pseudoknot (energy barrier height and distance to the transition state) could be correlated to frameshifting efficiency. These results indicate that the resistance of pseudoknots to mechanical unfolding is not a primary determinant of frameshifting efficiency. However, increased frameshifting efficiency was correlated with an increased tendency to form alternate, incompletely folded structures, suggesting a more complex picture of the role of the pseudoknot involving the conformational dynamics.
-1 框移,核糖体在信使 RNA 上的阅读框发生移动,从而产生另一种基因产物,这种情况通常是由 mRNA 中的假结结构与上游滑动序列共同触发的。不同位置的框移效率差异很大,但决定框移效率的因素尚未完全了解。先前的工作表明,框移效率与假结对机械解折叠的抵抗力有关。我们通过研究一系列框移效率在 2%到 30%之间的假结的力学特性来验证这一假设:四个来自逆转录病毒的假结,两个来自 luteoviruses 的假结,一个来自冠状病毒的假结,以及一个非框移噬菌体假结。我们使用光学镊子在 RNA 上施加张力,测量每个假结解折叠所需的力分布。我们发现,无论是平均解折叠力、解折叠动力学,还是描述假结机械解折叠的能量景观(能量势垒高度和过渡状态的距离)的参数,都不能与框移效率相关。这些结果表明,假结对机械解折叠的抵抗力不是框移效率的主要决定因素。然而,框移效率的提高与形成替代的、不完全折叠结构的趋势增加相关,这表明假结在构象动力学方面的作用更为复杂。