Department of Medicine, Section of Gastroenterology, Temple University School of Medicine, Philadelphia, PA 19140, USA.
Neurogastroenterol Motil. 2013 Jan;25(1):53-60.e6. doi: 10.1111/nmo.12010. Epub 2012 Sep 24.
We sought to determine how the individual components of the distal esophagus and proximal stomach form the gastroesophageal junction high-pressure zone (GEJHPZ) antireflux barrier.
An endoscopic ultrasound/manometry catheter was pulled through the proximal stomach and distal esophagus in 20 normal subjects. The axial length and width of individual structures on endoscopic ultrasound were measured. The anatomic orientation of gastroesophageal junction (GEJ) components was examined in two organ donor specimens using micro-computed tomography (micro-CT).
The three distinct structures identified within the GEJHPZ, from distal to proximal, were as follows: the gastric clasp and sling muscle fiber complex, crural diaphragm, and lower esophageal circular smooth muscle fibers (LEC). The LEC was statistically significantly thicker than adjacent esophageal muscles. These structures were associated with three pressure peaks. The pressure peak produced by the clasp/sling fiber complex often overlapped with the pressure peak from the crural diaphragm. The most proximal peak, associated with the LEC, was significantly greater and bimodal in nine of 20 subjects. This bimodal LEC pressure peak correlated with two areas of thickened muscle observed with ultrasound. Micro-CT of GEJ from organ donors confirmed the two areas of thickened muscle.
CONCLUSIONS & INFERENCES: Three distinct anatomic structures, the clasp and sling muscle fibers, crural diaphragm, and LEC combine to form the antireflux barrier of the proximal stomach and distal esophagus. The clasp and sling muscle fibers combine with the crural diaphragm to form a distal pressure profile. The more proximal LEC has a bimodal pressure profile in some patients.
我们旨在确定远端食管和近端胃的各个组成部分如何形成胃食管交界处高压区(GEJHPZ)抗反流屏障。
在 20 名正常受试者中,通过内镜超声/测压导管将其穿过近端胃和远端食管。在超声内镜上测量各个结构的轴向长度和宽度。使用微计算机断层扫描(micro-CT)检查两个器官供体标本中胃食管交界处(GEJ)成分的解剖方向。
从远端到近端,在 GEJHPZ 中确定了三个不同的结构,分别为:胃扣带和吊带肌肉纤维复合体、膈脚和下食管环状平滑肌纤维(LEC)。LEC 明显比相邻的食管肌肉厚。这些结构与三个压力峰相关。扣带/吊带纤维复合体产生的压力峰通常与膈脚的压力峰重叠。与近端相关的、与 LEC 相关的最接近的压力峰在 20 名受试者中的 9 名中显著更大且呈双峰型。这种双峰型 LEC 压力峰与超声观察到的两个增厚肌肉区域相关。器官供体的 GEJ 微 CT 证实了两个增厚肌肉区域的存在。
三个不同的解剖结构,即扣带和吊带肌肉纤维、膈脚和 LEC,共同形成了近端胃和远端食管的抗反流屏障。扣带和吊带肌肉纤维与膈脚结合形成了远端压力分布。在一些患者中,更接近的 LEC 具有双峰型压力分布。