Ulexite-galena intermediate-weight concrete as a novel design for overcoming space and weight limitations in the construction of efficient shields against neutrons and photons.

Recently, due to space and weight limitations, scientists have tried to design and produce concrete shields with increased attenuation of radiation but not increased mass density. Over the past years, the authors' had focused on the production of heavy concrete for radiation shielding, but this is the first experience of producing intermediate-weight concrete. In this study, ulexite (hydrated sodium calcium borate hydroxide) and galena (lead ore) have been used for the production of a special intermediate-weight concrete. Shielding properties of this intermediate-weight concrete against photons have been investigated by exposing the samples to narrow and broad beams of gamma rays emitted from a ⁶⁰Co radiotherapy unit. Densities of the intermediate-weight concrete samples ranged 3.64-3.90 g cm⁻³, based on the proportion of the ulexite in the mix design. The narrow-beam half-value layer (HVL) of the ulexite-galena concrete samples for 1.25 MeV ⁶⁰Co gamma rays was 2.84 cm, much less than that of ordinary concrete (6.0 cm). The Monte Carlo (MC) code MCNP4C was also used to model the attenuation of ⁶⁰Co gamma-ray photons and Am-Be neutrons of the ulexite-galena concrete with different thicknesses. The ⁶⁰Co HVL calculated by MCNP simulation was 2.87 cm, indicating a good agreement between experimental measurements and MC simulation. Furthermore, MC-calculated results showed that thick ulexite-galena concrete shields (60-cm thickness) had a 7.22 times (722 %) greater neutron attenuation compared with ordinary concrete. The intermediate-weight ulexite-galena concrete manufactured in this study may have many important applications in the construction of radiation shields with weight limitations such as the swing or sliding doors that are currently used for radiotherapy treatment rooms.