Institute of Analytical Chemistry, Johannes Kepler University Linz, Altenberger Strasse 69, A-4040 Linz, Austria.
J Chromatogr A. 2012 Nov 9;1263:108-12. doi: 10.1016/j.chroma.2012.09.033. Epub 2012 Sep 17.
The influence of mobile phase solvent composition and consequently retention factor on the chromatographic performance for a set of small molecules was studied using a commercially available poly(styrene-co-divinyl benzene) analytical scale porous polymeric monolithic column as an example. Chromatographic elution performance was studied across retention factors from close to 0 up to 100 realized for a set of structurally similar small molecules in a binary reversed-phase solvent environment of acetonitrile and water. By altering the mobile phase composition from volume fractions of acetonitrile of just 10% (v/v) to only acetonitrile it was systematically shown that gel porosity of the monolithic column plays a dominant role in modulating mass transport and the associated chromatographic efficiency in a consistent manner. Up to a sixfold difference in plate height was recorded for the most strongly retained hydrophobic solute (ethylbenzene) at a constant, low flow velocity simply by varying the amount of acetonitrile in the mobile phase. Plate height curves recorded for the set of solutes that comprise benzene, toluene, ethylbenzene as well as phenol and benzyl alcohol further demonstrate the importance of functional group content of the solute and the modulated porous gel structure on mass transport. These results highlight some important practical considerations for characterizing the chromatographic properties of any polymeric monolithic column. First, it is imperative that any chromatographic performance characterization using plate height data explicitly considers the influence of mobile phase composition, retention factor, molecular size and functional groups of the probe solute. Second, as the physicochemical conditions of the material are directly reflected in the gel porosity, a range of different mobile phase compositions, retention factors and probe-specific effects must be investigated to yield a fair appraisal of the chromatographic performance.
采用市售的聚(苯乙烯-二乙烯基苯)分析规模多孔聚合物整体柱为例,研究了流动相溶剂组成对一组小分子的色谱性能的影响,以及保留因子。在反相二元溶剂环境(乙腈和水)中,通过改变流动相组成,从小分子的保留因子接近 0 到 100,研究了色谱洗脱性能。通过将流动相中的乙腈体积分数从 10%(v/v)改变为仅乙腈,系统地表明整体柱的凝胶孔隙率以一致的方式在调节质量传递和相关的色谱效率方面起着主导作用。在恒定的低流速下,对于最强烈保留的疏水性溶质(乙苯),通过改变流动相中的乙腈量,记录到板高相差六倍。苯、甲苯、乙苯以及苯酚和苯甲醇组成的溶质的板高曲线进一步证明了溶质的官能团含量和调制的多孔凝胶结构对质量传递的重要性。这些结果突出了一些用于表征任何聚合物整体柱色谱性能的重要实际考虑因素。首先,使用板高数据进行任何色谱性能表征时,都必须明确考虑流动相组成、保留因子、分子大小和探针溶质的官能团的影响。其次,由于材料的物理化学条件直接反映在凝胶孔隙率中,因此必须研究一系列不同的流动相组成、保留因子和探针特异性效应,以公平评估色谱性能。