Chao Jerry, Ward E Sally, Ober Raimund J
Department of Electrical Engineering, University of Texas at Dallas, Richardson, TX 75080, USA.
Multidimens Syst Signal Process. 2012 Sep;23(3):349-379. doi: 10.1007/s11045-011-0150-7.
The high quantum efficiency of the charge-coupled device (CCD) has rendered it the imaging technology of choice in diverse applications. However, under extremely low light conditions where few photons are detected from the imaged object, the CCD becomes unsuitable as its readout noise can easily overwhelm the weak signal. An intended solution to this problem is the electron-multiplying charge-coupled device (EMCCD), which stochastically amplifies the acquired signal to drown out the readout noise. Here, we develop the theory for calculating the Fisher information content of the amplified signal, which is modeled as the output of a branching process. Specifically, Fisher information expressions are obtained for a general and a geometric model of amplification, as well as for two approximations of the amplified signal. All expressions pertain to the important scenario of a Poisson-distributed initial signal, which is characteristic of physical processes such as photon detection. To facilitate the investigation of different data models, a "noise coefficient" is introduced which allows the analysis and comparison of Fisher information via a scalar quantity. We apply our results to the problem of estimating the location of a point source from its image, as observed through an optical microscope and detected by an EMCCD.
电荷耦合器件(CCD)的高量子效率使其成为各种应用中首选的成像技术。然而,在极低光照条件下,从成像物体检测到的光子很少,由于其读出噪声很容易淹没微弱信号,CCD就变得不适用了。针对这个问题的一个预期解决方案是电子倍增电荷耦合器件(EMCCD),它能随机放大采集到的信号以消除读出噪声。在此,我们建立了计算放大信号的费舍尔信息量的理论,该信号被建模为一个分支过程的输出。具体而言,针对一般放大模型、几何放大模型以及放大信号的两种近似情况,我们得到了费舍尔信息表达式。所有表达式都适用于泊松分布初始信号这种重要情况,这是光子检测等物理过程的特征。为便于研究不同的数据模型,引入了一个“噪声系数”,它能通过一个标量对费舍尔信息进行分析和比较。我们将结果应用于从通过光学显微镜观察并用EMCCD检测到的图像中估计点源位置的问题。