Suppr超能文献

表面生长的单壁碳纳米管中碳前驱体对管径和手性角分布的依赖性。

Diameter and chiral angle distribution dependencies on the carbon precursors in surface-grown single-walled carbon nanotubes.

机构信息

Department of Biotechnology and Chemical Technology, School of Chemical Technology, Aalto University, P.O. Box 16100, FI-00076 Aalto, Finland.

出版信息

Nanoscale. 2012 Dec 7;4(23):7394-8. doi: 10.1039/c2nr32276e.

Abstract

Carbon nanotubes grown from discrete Fe-containing nanoparticles dispersed on a silicon nitride transmission electron microscope grid were systematically studied. The (n,m) indices of produced single-walled carbon nanotubes (SWNTs) were deduced from their electron diffraction patterns. Relatively small diameter SWNTs with a narrow diameter distribution (0.7-1.6 nm) were produced using CO as the carbon source at 800 °C, while large diameter SWNTs ranging from 1.0 nm to 4.7 nm were synthesized when using CH(4) as the carbon source. The chiral angle distributions of the SWNTs produced from different carbon sources are also different, which are attributed to the preferred cap nucleation associated with the carbon feed rate on the catalyst instead of carbon nanotube growth kinetics. Furthermore, growth of carbon laminar nanoclusters inside carbon nanotubes was achieved at a higher growth temperature, suggesting that dissociated carbon diffuses across the nanoparticle during the nanotube growth process.

摘要

在氮化硅传输电子显微镜网格上分散的离散含 Fe 纳米颗粒上生长的碳纳米管得到了系统研究。通过电子衍射图案推断出所生产的单壁碳纳米管(SWNTs)的(n,m)指数。在 800°C 下使用 CO 作为碳源时,会产生具有较窄直径分布(0.7-1.6nm)的相对较小直径的 SWNTs,而当使用 CH(4) 作为碳源时,则会合成直径从 1.0nm 到 4.7nm 的大直径 SWNTs。不同碳源产生的 SWNTs 的手性角分布也不同,这归因于与催化剂上的碳进料速率相关的优先帽成核,而不是碳纳米管生长动力学。此外,在较高的生长温度下实现了碳层状纳米团簇在碳纳米管内的生长,这表明在纳米管生长过程中,解离的碳穿过纳米颗粒扩散。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验