Faculty of Material Science and Ceramics, AGH University of Science and Technology, 30-059 Krakow, Poland.
Phys Chem Chem Phys. 2013 Feb 7;15(5):1417-30. doi: 10.1039/c2cp42601c. Epub 2012 Oct 23.
The interaction of metal oxides with gases is very important for the operation of energy devices such as fuel cells and gas sensors, and also relevant for materials synthesis and processing. The electronic transport properties of metal oxides for the aforementioned devices strongly depend on the chemistry of these gases and on the presence or absence of defects on the surface and in the bulk. The Debye screening length is in this respect a material specific property which becomes particularly significant when the material is comprised of nanoparticles. In the present study, poly-crystalline TiO(2), ZnO and SnO(2) nanoparticles were synthesized by a high temperature flame spray combustion process and investigated for their interaction with hydrogen. The chemistry of the reduced and oxidized surfaces of these metal oxides, where the interaction with gases takes place, was investigated in detail with X-ray photoelectron spectroscopy (XPS). The transitions found near E(F) with XPS are consistent with those found by diffuse reflectance spectroscopy (DRS) and were assigned to surface states originating from non-equilibrium oxygen vacancies. We show how the non-stoichiometric character of the metal oxide surface constitutes electronic surface defects, in particular oxygen vacancies which allow for additional transitions near the Fermi energy (E(F)). The concentration of these surface defects can be strongly reduced by thermal after-treatment under air or increased by Ar(+)-sputtering, after which significant spectral features appear near E(F). Such prominent changes are particularly observed for TiO(2) and SnO(2), whereas the stoichiometry of the ZnO surface seems to be less responsive to such reducing and oxidizing conditions. Pronounced changes of the electrical conductivity upon changing from reducing to oxidizing conditions at elevated temperatures were monitored by electrochemical impedance spectroscopy (EIS). The lowering of the potential barrier for the charge transport particularly at lower temperatures already at reducing conditions is confirmed. The impedance response indicates that charge transfer is governed predominantly by one single process, i.e. by interaction of surface-like states localized within depletion layer with gas molecules. This implies that the free charge carriers in the material are determined by the intrinsic property like non-stoichiometry. Gas sensors made from such FSS nanoparticulate metal oxides showed well developed sensing characteristics of the hydrogen sensing at moderate temperatures.
金属氧化物与气体的相互作用对于燃料电池和气体传感器等能量器件的运行非常重要,对于材料的合成和处理也具有重要意义。上述器件中金属氧化物的电子输运性质强烈依赖于这些气体的化学性质以及表面和体相中缺陷的存在或不存在。德拜屏蔽长度在这方面是一个材料特性,当材料由纳米颗粒组成时,它变得尤为重要。在本研究中,通过高温火焰喷雾燃烧法合成了多晶 TiO(2)、ZnO 和 SnO(2)纳米颗粒,并研究了它们与氢气的相互作用。用 X 射线光电子能谱(XPS)详细研究了这些金属氧化物的还原和氧化表面的化学性质,这些表面发生了与气体的相互作用。XPS 中在 E(F)附近发现的跃迁与漫反射光谱(DRS)中发现的跃迁一致,被分配到源自非平衡氧空位的表面态。我们展示了金属氧化物表面的非化学计量性质如何构成电子表面缺陷,特别是允许在费米能级(E(F))附近出现额外跃迁的氧空位。这些表面缺陷的浓度可以通过在空气中或通过 Ar(+)-溅射进行热后处理强烈降低,之后在 E(F)附近会出现显著的光谱特征。在 TiO(2)和 SnO(2)中可以观察到特别明显的变化,而 ZnO 表面的化学计量似乎对这种还原和氧化条件的响应较小。在升高的温度下,从还原条件变为氧化条件时,通过电化学阻抗谱(EIS)监测到电导率的显著变化。在还原条件下,特别是在较低温度下,电荷输运的势垒降低得到了证实。阻抗响应表明,电荷转移主要由一个过程控制,即通过耗尽层内局部化的表面状态与气体分子的相互作用。这意味着材料中的自由载流子由非化学计量等固有特性决定。由这种 FSS 纳米颗粒金属氧化物制成的气体传感器在中等温度下表现出良好的氢气传感感测特性。