Marqa Mohamad Feras, Mordon Serge, Betrouni Nacim
Inserm, U703, 152 rue du Docteur Yersin, 59120 Loos, France.
Lasers Surg Med. 2012 Dec;44(10):832-9. doi: 10.1002/lsm.22097. Epub 2012 Nov 26.
Laser interstitial thermotherapy (LITT) is potentially a novel method to treat small breast fibroadenoma, without the need for surgical removal. Dosimetry planning and conformation of the treated area of tumor remain major issues, especially for a moving organ such as the breast. Pre-treatment simulation planning of this therapy is an effective method to predict the final thermal damage. In this study, a mathematical model is elaborated to simulate the heat distribution and the thermal damage.
The mathematical model was based on finite element method (FEM) to solve the light distribution, bioheat, and thermal damage equations. Six simulations were performed with the following powers: 5, 6, 7, 8, 9, and 10 W (λ = 980 nm), and for an irradiation time of 125 seconds, with a 50 °C iso-damage temperature. To validate these simulations, six turkey breast samples were irradiated with parameters used for simulations. Volumes of thermal damage were calculated by using formulas: spherical, Elliptical, and Carlsson volumes and compared to the simulated volumes.
Differences between volumes were from 0.01 to 1 cm3. Interpolations between volumes from ex vivo experiments with corresponding powers were established. The relationship between the volume of the thermal damage and the laser power was described by a polynomial equation (R2 = 0.99). The power estimated by the interpolation to obtain 1 cm3 of thermal damage was 7.4 W (922 J) and the maximum corresponding temperature was 90 °C.
In this study, a good correlation was established between simulation and ex vivo experiments of LITT for fibroadenoma breast cancer.
激光间质热疗(LITT)可能是一种治疗小乳腺纤维瘤的新方法,无需手术切除。肿瘤治疗区域的剂量学规划和形态确定仍然是主要问题,尤其是对于像乳房这样的活动器官。这种治疗的治疗前模拟规划是预测最终热损伤的有效方法。在本研究中,精心构建了一个数学模型来模拟热分布和热损伤。
该数学模型基于有限元法(FEM)来求解光分布、生物热和热损伤方程。使用以下功率进行了六次模拟:5、6、7、8、9和10 W(λ = 980 nm),照射时间为125 秒,等损伤温度为50°C。为了验证这些模拟,用模拟所使用的参数对六个火鸡乳房样本进行了照射。通过使用公式计算热损伤体积:球形、椭圆形和卡尔森体积,并与模拟体积进行比较。
体积之间的差异为0.01至1 cm³。建立了离体实验中相应功率下体积之间的插值关系。热损伤体积与激光功率之间的关系由多项式方程描述(R² = 0.99)。通过插值估计获得1 cm³热损伤所需的功率为7.4 W(922 J),最大相应温度为90°C。
在本研究中,LITT治疗乳腺纤维瘤的模拟与离体实验之间建立了良好的相关性。