Piezoelectric surgery in mandibular split crest technique with immediate implant placement: a case report.

Implant supported rehabilitation of thin edentulous ridges with horizontal atrophy necessitates a regenerative approach. Within the procedures for horizontal bone defects augmentation, ridge expansion techniques permit dislocation of the buccal bone plate in a labial direction and simultaneous implant insertion in single-stage surgery, abbreviating overall treatment time.The piezoelectric ridge expansion technique permits to obtain the expansion of very mineralized bone crests without excessive traumas or the risk of ridge fractures. The case reported shows an implant treatment for partial edentulous lower arch rehabilitation. A full-split thickness flap was raised. The mucoperiosteal reflection permitted to identify alveolar crest contour where osteotomies had to be performed. Split thickness dissection allowed periosteal blood supply to be mainteined on the buccal bone plate. After horizontal and vertical osteotomies were performed with OT7 piezoelectric microsaw (Piezo-surgery, Mectron), a single-bevel scalpel was used to move the buccal bone plate to the labial. Two Straumann TE 3.3/4.8 mm wide implants were inserted in the lower right premolar area, and 1 Straumann 4.8 mm Wide Neck implant was inserted to replace lower right first molar. The amount of bone expansion was equal to the cervical diameter of the placed implants (4.8 mm) and residual bone gap was packed with Bio-Oss granules (Geistlich). Healing was uneventful and 3 months later final restorations with implant-supported porcelain-fused-to-metal crowns were cemented.