Interdisciplinary Division of Biomedical Engineering, The Hong Kong Polytechnic University, Hong Kong SAR, China.
IEEE Trans Ultrason Ferroelectr Freq Control. 2013 Jan;60(1):178-86. doi: 10.1109/TUFFC.2013.2548.
Micro-ultrasound is an invaluable imaging tool for many clinical and preclinical applications requiring high resolution (approximately several tens of micrometers). Imaging systems for micro-ultrasound, including single-element imaging systems and linear-array imaging systems, have been developed extensively in recent years. Single-element systems are cheaper, but linear-array systems give much better image quality at a higher expense. Annular-array-based systems provide a third alternative, striking a balance between image quality and expense. This paper presents the development of a novel programmable and real-time annular-array imaging platform for micro-ultrasound. It supports multi-channel dynamic beamforming techniques for large-depth-of-field imaging. The major image processing algorithms were achieved by a novel field-programmable gate array technology for high speed and flexibility. Real-time imaging was achieved by fast processing algorithms and high-speed data transfer interface. The platform utilizes a printed circuit board scheme incorporating state-of-the-art electronics for compactness and cost effectiveness. Extensive tests including hardware, algorithms, wire phantom, and tissue mimicking phantom measurements were conducted to demonstrate good performance of the platform. The calculated contrast-to-noise ratio (CNR) of the tissue phantom measurements were higher than 1.2 in the range of 3.8 to 8.7 mm imaging depth. The platform supported more than 25 images per second for real-time image acquisition. The depth-of-field had about 2.5-fold improvement compared to single-element transducer imaging.
微超声是一种非常有价值的成像工具,适用于许多需要高分辨率(约几十微米)的临床和临床前应用。近年来,微超声成像系统,包括单元素成像系统和线性阵列成像系统,得到了广泛的发展。单元素系统更便宜,但线性阵列系统在更高的费用下提供了更好的图像质量。基于环形阵列的系统提供了第三种选择,在图像质量和费用之间取得了平衡。本文介绍了一种新型的可编程实时环形阵列超声成像平台的开发。它支持多通道动态波束形成技术,用于大景深成像。主要的图像处理算法是通过一种新颖的现场可编程门阵列技术实现的,以实现高速和灵活性。通过快速处理算法和高速数据传输接口实现实时成像。该平台采用印刷电路板方案,结合最先进的电子技术,实现紧凑和经济高效。进行了广泛的测试,包括硬件、算法、金属丝仿体和组织模拟仿体测量,以证明该平台的良好性能。组织仿体测量的计算对比噪声比(CNR)在 3.8 至 8.7 毫米成像深度范围内高于 1.2。该平台支持每秒超过 25 帧的实时图像采集。与单元素换能器成像相比,景深提高了约 2.5 倍。